• No results found

University of Groningen Self-adaptive and self-healing nanocomposite tribocoatings Cao, Huatang

N/A
N/A
Protected

Academic year: 2021

Share "University of Groningen Self-adaptive and self-healing nanocomposite tribocoatings Cao, Huatang"

Copied!
4
0
0

Bezig met laden.... (Bekijk nu de volledige tekst)

Hele tekst

(1)

University of Groningen

Self-adaptive and self-healing nanocomposite tribocoatings

Cao, Huatang

IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite from it. Please check the document version below.

Document Version

Publisher's PDF, also known as Version of record

Publication date: 2019

Link to publication in University of Groningen/UMCG research database

Citation for published version (APA):

Cao, H. (2019). Self-adaptive and self-healing nanocomposite tribocoatings. University of Groningen.

Copyright

Other than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons).

Take-down policy

If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.

Downloaded from the University of Groningen/UMCG research database (Pure): http://www.rug.nl/research/portal. For technical reasons the number of authors shown on this cover page is limited to 10 maximum.

(2)

149

P

UBLICATION LIST

Part A: PVD tribocoating of this thesis

1. H.T. Cao, J.Th.M. De Hosson, Y.T. Pei. Self-healing of a pre-notched WS2/a-C coating.

Materials Research Letters, 7 (2019)103-109.

2. H.T. Cao, F. Wen, S. Kumar, P. Rudolf, J.Th.M. De Hosson, Y.T. Pei. On the S/W stoichiometry and triboperformance of WSxC(H) coatings deposited by magnetron

sputtering. Surface and Coatings Technology, (2019), in press, DOI: https://doi.org/10.1016/j.surfcoat.2018.04.040

3. H.T. Cao, F, Wen, J.Th.M. De Hosson, Y.T. Pei. Instant WS2 platelets reorientation of

self-adaptive WS2/a-C tribocoating. Materials Letters, 229 (2018) 64–67.

4. H.T. Cao, J.Th.M. De Hosson, Y.T. Pei. Effect of carbon concentration and argon flow rate on the microstructure and triboperformance of WS2/a-C sputtered coating.

Surface and Coatings Technology, 332 (2017), 142-152.

5. H.T. Cao, F. Wen, J.Th.M. De Hosson, Y.T. Pei. On the self-healing performance of WS2/a-C tribocoatings. Tribology International, under review.

6. H.T. Cao, J.Th.M. De Hosson, Y.T. Pei. Self-adaptive triboactivity of WS2/a-C coating:

From room to elevated temperature till 500 °C, (in preparation).

Part B: Metallurgical alloying coating

7. H.T. Cao, X.P. Dong, A. Chabok, J.C. Rao, J.Th.M. De Hosson, Y.T. Pei. Hard-yet-tough high-vanadium hierarchical composite coating: Microstructure and mechanical properties. Materials Science and Engineering A, 736 (2018) 87-99.

8. H.T. Cao, X.P. Dong, Y.T. Pei. Hard yet tough high vanadium high speed steel composite coating in-situ alloyed by atmospheric plasma arc. International Journal of Computational Methods and Experimental Measurements, 6(3) (2018) 540–550 (conference proceedings).

9. H.T. Cao, X.P. Dong, S.Q. Chen. M. Dutka, Y.T. Pei. Microstructure evolution of graded high-vanadium tool steel composite coating in-situ fabricated via atmospheric plasma beam alloying. Journal of Alloys and Compounds, 720 (2017) 169-181. 10. H.T. Cao,X.P. Dong, Z. Pan, X.W. Wu, Q.W. Huang, Y.T. Pei. Surface alloying of

high-vanadium high-speed steel on ductile iron using plasma transferred arc alloying technique: microstructure and wear properties. Materials & Design, 100 (2016) 223-234.

(3)

Publication list

150

Part C: Contributions to other projects

11. F. Zeng, X.Y. Xi, H.T. Cao, Y.T. Pei, H.J. Heeres, R. Palkovits. Synthesis of mixed alcohols with enhanced C3+ alcohol production by CO hydrogenation over potassium promoted molybdenum sulfide. Applied Catalysis B: Environmental, 246 (2019) 232-241.

12. J.Q. Liu, Z.Y. Wu, H.T. Cao, F. Wen, Y.T. Pei. Effect of bias voltage on the tribological and sealing properties of rubber seals modified by DLC films. Surface and Coatings Technology, 360 (2019), 391-399.

13. Y.F. Fan, H.T. Cao, F.V. Mastrigt, Y.T. Pei, F. Picchioni. Copper-mediated homogeneous living radical polymerization of acrylamide with waxy potato starch-based macroinitiator. Journal of Carbohydrate Polymers, 192 (2018) 61–68.

14. J.Q. Liu, L.J. Li, B. Wei, F. Wen, H.T. Cao, Y.T. Pei. Effect of sputtering pressure on the surface topography, structure, wettability and tribological performance of DLC films coated on rubber by magnetron sputtering. Surface and Coatings Technology, (2019), in press, DOI: https://doi.org/10.1016/j.surfcoat.2018.05.012

15. B. Wei, H.G. Li, H.T. Cao, F, Wen. Optimum design of reactive sputtering parameters on the mechanical property of C-doped TiO2 photocatalytic films: CO2 as carbon

source. Materials Science Forum, (2019), in press.

16. B. Wei, J.L. Xue, H.T. Cao, H.G. Li, F. Wen, Y.T. Pei. Effects of annealing on the composition, structure and photocatalytic properties of C-doped Titania films deposited by reactive magnetron sputtering using CO2 as carbon source. Surface

Review and Letters, (2018), in press,

DOI: https://doi.org/10.1142/S0218625X19500367

17. J.J. Feng, C.X. Pan, L.L Lu, Q.W. Huang, H.T. Cao. Plasma transferred arc (PTA) surface alloying of Cr-Ni-Mo powders on compacted graphite iron. Journal of Iron and Steel Research, International, 23 (6) (2016) 618-624.

18. A. Chabok, M. Ahmadi, H.T. Cao, E. van der Aa, M. Masoumi, J.Th.M. De Hosson, Y.T. Pei. A new insight into the fracture behavior of 3rd generation advanced high strength steel resistance spot welds. Acta Materialia, submitted.

19. S. Sabooni, E. Galinmoghaddam, H.T. Cao, R.J. Westerwaal, E. Zoestbergen, J.Th.M. De Hosson, Y.T. Pei. New insight in the loss of adhesion of ZnMg-Zn bi-layered coatings. Surface and Coatings Technology, submitted.

Part D: Conferences

1. H.T. Cao, J.Th.M. De Hosson, Y.T. Pei. Nanocomposite WS2/a-C coatings: Self-healing

(4)

Publication list

151

Conference, December 10-11, 2018, Noordwijkerhout, the Netherlands, (Oral presentation).

2. H.T. Cao, J.Th.M. De Hosson, Y.T. Pei. Effect of target-substrate distance on the S/W stoichiometry and triboperformance of WSxC(H) coatings deposited by magnetron

sputtering. The 14th International Conference on Plasma Based Ion Implantation & Deposition (PBIID 2017), Oct 17-20, 2017, Shanghai, China, (Oral presentation). 3. H.T. Cao, X.P. Dong, Y.T. Pei. Hard yet tough high vanadium high speed steel

composite coating in-situ alloyed by atmospheric plasma arc. The 8th International Conference on Computational Methods and Experiments in Material and Contact Characterization, 21-23 June, 2017, Tallinn, Estonia, (Invited talk).

4. H.T. Cao, J.Th.M. De Hosson, Y.T. Pei. Effect of carbon concentration and argon flow rate on the microstructure and triboperformance of WS2/a-C sputtered coating. The

44th International conference on Metallurgical Coatings and Thins films (ICMCTF 2017, B3-2-4), 23-28 April, San Diego, California, USA, (Oral presentation).

5. H.T. Cao,J.Th.M. De Hosson, Y.T. Pei. Effect of argon flow rate on the tribological performance of the self-lubricating WS2/a-C sputtered coating. The 15th

International Conference on Reactive Sputter Deposition (RSD), Dec 1-2, 2016, Ghent, Belgium, (Poster).

Referenties

GERELATEERDE DOCUMENTEN

I would like to express my thanks to other collaborators in Tata Steel, Stefan Melzer for the discussion on GO electrical steel, Jean Campaniello for the discussion on HSLA

Precipitates play crucial roles in grain oriented electrical steels and high strength low alloy (HSLA) steels. State-of-the-art (scanning) transmission electron

The research presented in this thesis was performed in the Advanced Production Engineering (APE) group of Engineering and Technology institute Groningen (ENTEG) and

Wear from sliding surfaces is typically the result of one or more of the following main mechanisms [2,3]: (i) abrasive wear, whereby a hard counterface slides across a softer

Characterization tools such as scanning electron microscope (SEM), transmission electron microscope (TEM), focused ion beam (FIB), atomic force microscope (AFM),

Figure 3.8 Tribological performance as a function of carbon content: (a) average coefficient of friction; (b) wear rate; (c) coefficient of friction curves of WS 2 /a-C

It can be concluded that, for tribological applications, WS x C(H) coatings are not necessarily to reach WS 2 stoichiometry by excessively increasing the target- substrate

Figure 5.3d and e confirm that characteristic WS 2 basal planes formed are well aligned parallel to the sliding direction,.. that is, to the interface between the tribofilm