6
REFERENCES
6 REFERENCES
[1] International Energy Agency (IEA), Key World Energy Statistics 2012. Paris: OECD, 2011. [Online]. Available:
http://www.iea.org/publications/freepublications/publication/name,26707,en.ht ml
[2] Eskom Ltd., “Eskom divisional report 2011”, Eskom Ltd., Johannesburg. [Online]. Available: http://www.eskom.co.za
[3] Eskom Ltd., “Eskom divisional report 2012”, Eskom Ltd., Johannesburg. [Online]. Available: http://www.eskom.co.za
[4] Eskom Ltd., “Eskom annual report 2012”, Eskom Ltd., Johannesburg, 2012. [Online]. Available: http://www.eskom.co.za
[5] Eskom IDM, “The ESCO model,” Eskom Ltd., Johannesburg. [Online]. Available: http://www.eskomidm.co.za/funding-options, [8 Sept. 2012].
[6] H. N. Hickok, “Adjustable speed: A tool for saving energy losses in pumps, fans, blowers, and compressors,” IEEE Transactions on Industry Applications, vol. 1A-21, no. 1, pp. 123-136, Jan. 1985.
[7] R. Saidur, N. A. Rahim, and M. Hasanuzzaman, “A review on compressed-air energy use and energy savings,” Renewable and Sustainable Energy Reviews, vol. 14, no. 4, pp. 1135-1153, May 2010.
[8] M. I. Howells, “The targeting of industrial energy audits for DSM planning,”
Journal of Energy in Southern Africa, vol. 17, no. 1, February 2006. [9] M. Botha, “The state of the power system,” Energize, pp. 6-8, Aug. 2011.
[10] J. C. Vosloo, “A new minimum cost model for water reticulation systems on deep mines,” Ph.D. Eng. thesis, North-West University, Potchefstroom, South Africa, 2008.
[11] L. Berkele et al., Improving Compressed Air System Performance: A
Sourcebook for Industry, 2nd ed. Washington: US Department of Energy, 2004. [Online]. Available: http://www.eere.energy.gov/
[12] J. J. du Toit, “Conversion of Eimco 26B Pneumatic Loader to Electro-hydraulic Control,” Goldfields: Kloof Gold Mine South Africa.
[13] R. Joubert, “Cost and time effective DSM on mine compressed air systems,” M.Eng. dissertation, North-West University, Potchefstroom, South Africa, 2010.
[14] A. J. M. van Tonder, “Sustaining compressed air DSM project savings using an air leakage management system,” M.Eng. dissertation, North-West University, Potchefstroom, South Africa, 2010.
[15] R. Brake and G. Bates, “Criteria for the design of emergency refuge stations for an underground metal mine,” Journal of the AusIMM, Dec. 1999.
[16] N. Jordaan, “New demand side management opportunities in the precious metals industry,” Ph.D. Eng. thesis, North-West University, Potchefstroom, South Africa, 2007.
[17] Y. A. Çengel and M. A. Boles, Thermodynamics and Engineering Approach, 5th ed. Michigan: McGraw-Hill Higher Education, 2006, pp. 392-395.
[18] A. Beyene, “Energy efficiency and industrial classification,” Energy
Engineering, vol. 102, no. 2, pp.59-80, Mar. 2005.
[19] J. R. Neale and P. J. J. Kamp, "Compressed air system best practice programmes: What needs to change to secure long-term energy savings for New Zealand?" Energy Policy, vol. 37, no.9, pp. 3400-3408, Apr. 2009.
[20] M. Yang, “Air compressor efficiency in a Vietnamese enterprise,” Energy
Policy, vol. 37, no.6, pp. 2327–2337, June 2009.
[21] M. Aller, D. Stinson, and P. Edwards, “The financial impact of compressed air projects”, in Cement Industry Technical Conference, 2006, pp. 156-167.
[22] J. N. du Plessis, “Development of an energy management solution for mine compressor systems,” M.Eng. dissertation, North-West University, Potchefstroom, South Africa, 2010.
[23] D. Howett, “Compressed air: High pressure can equal lower cost,” Energy
Engineering, vol. 100, no. 4, pp. 6-9, 2003.
[24] Z. Wagner. Turbo compressor uses green cooling. WESU Water Engineering Systems (Pty) Ltd., Johannesburg South Africa. [Online]. Available: http://www.wesu.co.za/Compressor-Cooling.pdf
[25] P. J. Petit, “Financial evaluation of electric rock drills for in-stope mining in platinum operations,” in Proceedings of the SAIMM International Platinum
Conference, 2006, pp. 217-220.
[26] J. Wills, “Hydro power and stope drilling systems: An energy saving perspective,” presented at the SAIMM Narrow Vein and Reef Conference, Sun City, South Africa, 2008.
[27] W. Booysen, “Reducing energy consumption on RSA mines through optimised compressor control,” M.Eng. dissertation, North-West University, Potchefstroom, South Africa, 2010.
[28] E. D. Condron IV, "Cost savings realized through proper sizing of an excessive instrument air system," M.S thesis, University of North Texas, United States of America, Dec. 2003.
[29] D. Eaton, J. Rama, and A. Macak, “Zero downtime: Five years of operation with new adjustable speed electric drive on critical non-spared compressors,” in
Proceedings of the Petroleum and Chemical Industry Conference, 2006, pp. 1-7. [30] R. W. Ford, “Demand control valves: Help or hindrance,” Energy Engineering,
vol. 101, no. 2, pp. 6–15, 2004.
[31] M. Mullet and S. Schultz, “Wise rules for industrial efficiency: A tool kit for estimating energy savings and greenhouse gas emissions reductions,” US
[32] R. S. Foss, “Optimizing the compressed air system,” Energy Engineering, vol. 102, no. 1, pp.49-60, 2005.
[33] J. Snyman, “Integrating various energy saving initiatives on compressed air systems of typical South African gold mines,” M.Eng. dissertation, North-West University, Potchefstroom, South Africa, 2011.
[34] F. Willems, W. P. M. H. Hemeels, B. de Jager, and A. A. Stoorvogel “Positive feedback stabilization of centrifugal compressor surge,” Automatica, vol. 38, no. 2, pp.311–318, Feb. 2002.
[35] F. Blanchini and P. Giannattasio, “Adaptive control of compressor surge instability,” Automatica, vol. 38, no.8, pp.1373-1380, Aug. 2002.
[36] R. S. Shehata, H. A. Abdullah, and F. F. G. Areed, “Variable structure surge control for constant speed centrifugal compressors,” Control Engineering
Practice, vol. 17, no. 7, pp. 815-833, Jul. 2009.
[37] K. Brun and M. G. Nored, “Application guideline for centrifugal compressor surge control systems,” Release version 4.3, Gas Machinery Research Council, Southwest Research Institute, Dallas, TX, pp52-53, Apr. 2008.
[38] J. W. Lodewyckx, “Investigating the effects of different DSM strategies on a compressed air ring,” M.Eng. dissertation, North-West University, Potchefstroom, South Africa, 2007.
[39] J. W. Lodewyckx, “Investigating the effects of different DSM strategies on a compressed air ring,” in Proceedings of the Fifth Conference on the Industrial
and Commercial Use of Energy, 2008, pp. 1-4.
[40] F. W. Schroeder, "Energy efficiency opportunities in mine compressed air systems," M.Eng. dissertation, North-West University, Potchefstroom, South Africa, 2009.
[41] F. Endrejat, R. A. Hanna, and J. Shultz, “Ensuring availability of a large adjustable-speed drive for process gas compressor application rated 11 kV 15.5 MW (20 778 hp),” IEEE Transactions on Industry Applications, vol. 46, no. 5, pp. 1843-1849, Sep. 2010.
[42] W. Booysen, M. Kleingeld, and J. F. van Rensburg, “Optimising compressor control strategies for maximum energy savings,” Energize, pp. 65-68, July 2009.
[43] L. Liebenberg, D. Velleman, and W. Booysen, “A simple demand-side management solution for a typical compressed-air system at a South African gold mine,” Journal of Energy in Southern Africa, vol. 23, no. 2, May 2012.
[44] W. Booysen, M. Kleingeld, and J. F. van Rensburg, “Development of an energy management solution for mine compressor systems,” in Proceedings of the
Seventh Conference on the Industrial and Commercial Use of Energy, 2010, pp. 39-42.
[45] A. J. Schutte and M. Kleingeld, “Case studies of optimised compressed air usage on gold mines,” in Proceedings of the Seventh Conference on the
Industrial and Commercial Use of Energy, 2010, pp. 85-90.
[46] J. N. du Plessis and R. Pelzer, “Development of an intelligent control system for mine compressor systems,” in Proceedings of the Eighth Conference on the
Industrial and Commercial Use of Energy, 2011, pp. 57-61.
[47] A. J. M. van Tonder, R. Pelzer, and J. F. van Rensburg, “Sustaining compressed air DSM project savings using an air leakage management system,” in
Proceedings of the Eight Conference on the Industrial and Commercial Use of Energy, 2011, pp. 139-143.
[48] R. Joubert and L. Liebenberg, “Cost and time efficient DSM on mine compressed air systems,” in Proceedings of the Seventh Conference on the
[49] H. P. R. Joubert, G. Bolt, and J. F. van Rensburg, “Energy savings on mining compressed air networks through dedicated process plant compressors,” in
Proceedings of the Ninth Conference on the Industrial and Commercial Use of Energy, 2012, pp. 99-102.
[50] H. P. R. Joubert, J. F. van Rensburg, and R. Pelzer, “Energy efficiency opportunities resulting from splitting a compressed air ring,” in Proceedings of the
Eight Conference on the Industrial and Commercial Use of Energy, 2011, pp. 75-81.
[51] A. Garbers, M. Kleingeld, and J. F. van Rensburg, “Energy savings through auto compression and the air distribution control of a deep level gold mine,” in
Proceedings of the Seventh Conference on the Industrial and Commercial Use of Energy, 2010, 65. -69.
[52] J. H. Marais, M. Kleingeld, and J. F. van Rensburg, “Challenges in the scaling of energy savings baselines on mine compressed air systems,” in Proceedings of
the Eighth Conference on the Industrial and Commercial Use of Energy, 2011, pp. 89-93.
[53] J. H. Marais and M. Kleingeld, “An expert control system to achieve energy savings on mine compressed air systems,” in Proceedings of the Seventh
Conference on the Industrial and Commercial Use of Energy, 2010, pp. 77-80. [54] H. Neser, “Energy savings through the automatic control of underground
compressed air demand,” M.Eng. dissertation, North-West University, Potchefstroom, South Africa, 2008.
[55] H. Neser, R. Pelzer, and M. Kleingeld, “Energy savings through the automatic control of underground compressed air demand,” in Proceedings of the Sixth
Conference on the Industrial and Commercial Use of Energy, 2009, pp. 73-76. [56] A. van Jaarsveld and S. Ebben, “Development and implementation of an
electrically powered stope rockdrill for Tau Tona mine,” presented at the SAIMM Narrow Vein and Reef Conference, Sun City, South Africa, 2008.
[57] D. Labuschagne, “Leading Practice Adoption Guide for the HILTI Rock Drill,” Revision 1, Chamber of Mines of South Africa, Johannesburg, Feb. 2010.
[58] T. C. Marshal and R. M. F Seawright, “A comparison between hydraulic and pneumatic rock drills,” Journal of the South African Institute of Mining and
Metallurgy, pp. 181-184, Feb. 1975.
[59] P. Fraser, “Saving energy by replacing compressed air with localized hydropower systems: A ‘half level’ model approach,” in Proceedings of the
Third International Platinum Conference: Platinum Transformation, 2008, pp. 285-292.
[60] F. Xiao, R. Akoh, and I. Satoshi, “Unified formulation for compressible and incompressible flows by using multi-integrated moments II: Multi-dimensional version for compressible and incompressible flows,” Journal of Computational
Physics, vol. 213, no. 1, pp.31-56, Mar. 2006.
[61] W. Jiang, J. Khan, and R. A. Dougal, “Dynamic centrifugal compressor model for system simulation,” Journal of Power Sources, vol. 158 no.2 pp. 1333–1343, 2006.
[62] K. Ghorbanian and M. Gholamrezaei, “An artificial neural network approach to compressor performance prediction,” Applied Energy, vol. 86, nos. 7-8, pp. 1210-1221, Jul.–Aug. 2009.
[63] C. F. Scheepers, “Implementing energy efficiency measures on the compressed air network of old South African mines,” M.Eng. dissertation, North-West University, Potchefstroom, South Africa, 2011.
[64] M. Kleingeld and J. H. Marais, “A high level strategy plan for reducing a mine group’s dependence on compressed air,” in Proceedings of the Seventh
Conference on the Industrial and Commercial Use of Energy, 2010, pp. 71-76. [65] Eskom Ltd., “Tariffs and Charges Booklet 2012/13,” Eskom Ltd.,
[66] L. Padachi et al., “Energy efficiency through the integration of compressed air supply control with air network demand control,” in Proceedings of the Sixth
Conference on the Industrial and Commercial Use of Energy, 2009, pp. 77-80. [67] Eskom IDM, “Payment rates and benchmarks,” Eskom Ltd., Johannesburg.
[Online]. Available: http://www.eskomidm.co.za/industrial/sop, [8 Sept. 2012].
[68] Department of Energy South Africa, “Policy to support the Energy Efficiency and Demand Side Management Program for the Electricity Sector through the Standard Offer Incentive Scheme”, Department of Energy South Africa, 20 May 2010. [Online]. Available: http://www.energy.gov.za
[69] United Nations, “Kyoto Protocol to the United Nations Framework Convention on Climate Change,” United Nations, 1998.
[70] G. Bolt, M. Kleingeld, and J. F. van Rensburg, “Carbon tax: Future models and impact,” in Proceedings of the Eighth Conference on the Industrial and
Commercial Use of Energy, 2011, pp. 167-173.
[71] L. Van Der Zee, M. Kleingeld M, E.H. Mathews, “Electricity cost modelling of the Energy Conservation Scheme (ECS) for the gold mining industry of South Africa”, in Proceedings of the Ninth Conference on the Industrial and
