Not lean by default Ziengs, Nick
IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite from it. Please check the document version below.
Document Version
Publisher's PDF, also known as Version of record
Publication date: 2018
Link to publication in University of Groningen/UMCG research database
Citation for published version (APA):
Ziengs, N. (2018). Not lean by default: Exploring practices, their design, and underlying mechanisms driving performance. University of Groningen, SOM research school.
Copyright
Other than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons).
Take-down policy
If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.
Downloaded from the University of Groningen/UMCG research database (Pure): http://www.rug.nl/research/portal. For technical reasons the number of authors shown on this cover page is limited to 10 maximum.
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 203PDF page: 203PDF page: 203PDF page: 203 195
R
References
Adams, J. S. (1963). Toward an Understanding of Inequity. Journal
of Abnormal Psychology, 67, 422–436.
Adams, J. S., & Freedman, S. (1976). Equity Theory Revisited:
Comments and Annotated Bibliography. Advances in
Experimental Social Psychology, 9, 43–90.
Albliwi, S., Antony, J., Abdul Halim Lim, S., & van der Wiele, T. (2014). Critical failure factors of Lean Six Sigma: a
systematic literature review. International Journal of Quality &
Reliability Management, 31, 1012–1030.
Anderson, J. C., Rungtusanatham, M., Schroeder, R. G., & Devaraj, S. (1995). A Path Analytic Model of a Theory of Quality
Management Underlying the Deming Management Method:
Preliminary Empirical Findings. Decision Sciences, 26, 637–658. Bendoly, E., Donohue, K., & Schultz, K. L. (2006). Behavior in
operations management: Assessing recent findings and
revisiting old assumptions. Journal of Operations Management,
24, 737–752.
Bertrand, J. W. M., & Van Ooijen, H. P. G. (2002). Workload based
order release and productivity: a missing link. Production
Planning & Control, 13, 665–678.
Bhamu, J., Sangwan, K. S., & Singh Sangwan, K. (2014). Lean
manufacturing: literature review and research issues.
International Journal of Operations and Production Management, 34, 876–940.
Bhasin, S., & Burcher, P. (2006). Lean viewed as a philosophy.
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 204PDF page: 204PDF page: 204PDF page: 204 196
R
Birdi, K., Clegg, C., Patterson, M., Robinson, A., Stride, C. B., Wall, T. D., & Wood, S. J. (2008). The impact of human resource
and operational management practices on company
productivity: A longitudinal study. Personnel Psychology, 61,
467–501.
Boon, O. K., Arumugam, V., Safa, M. S., & Bakar, N. A. (2007).
HRM and TQM: association with job involvement. Personnel
Review, 36, 939–962.
Borenstein, M., Hedges, L. V., Higgins, J. P. T., & Rothstein, H. R. (2009). Introduction to Meta-Analysis (Statistics in Practice). Chichester, West Sussex: Wiley.
Bortolotti, T., Boscari, S., & Danese, P. (2015). Successful lean
implementation: Organizational culture and soft lean
practices. International Journal of Production Economics, 160,
182–201.
Bortolotti, T., Danese, P., Flynn, B. B., & Romano, P. (2015).
Leveraging fitness and lean bundles to build the cumulative performance sand cone model. International Journal of
Production Economics, 162, 227–241.
Bou-Llusar, J. C., Escrig-Tena, A. B., Roca-Puig, V., & Beltrán-Martín, I. (2009). An empirical assessment of the EFQM
Excellence Model: Evaluation as a TQM framework relative to the MBNQA Model. Journal of Operations Management, 27,
1–22.
Boyer, K. K., & Swink, M. L. (2008). Empirical elephants—why
multiple methods are essential to quality research in operations and supply chain management. Journal of
Operations Management, 26, 337–348.
Buzacott, J. A. (1989). Queueing models of Kanban and MRP
controlled production systems. Engineering Costs and
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 205PDF page: 205PDF page: 205PDF page: 205 197
R
Chang, D., & Lee, S. M. (1995). Impact of JIT on organizational
performance of U.S. firms. International Journal of Production
Research, 33, 3053–3068.
Chang, T. M., & Yih, Y. (1994). Generic kanban systems for
dynamic environments. International Journal of Production
Research, 32, 889–902.
Cheung, M. W. L., & Chan, W. (2005). Meta-analytic structural
equation modeling: A two-stage approach. Psychological
Methods, 10, 40–64.
Choi, T. Y., & Eboch, K. (1998). The TQM Paradox: Relations
among TQM Practices, Plant Performance, and Customer Satisfaction. Journal of Operations Management, 17, 59–75.
Choi, T. M., Cheng, T. C. E., & Zhao, X. (2016). Multi‐
Methodological Research in Operations Management.
Production and Operations Management, 25, 379-389.
Clarke, S. (2013). Safety leadership: A meta-analytic review of
transformational and transactional leadership styles as antecedents of safety behaviours. Journal of Occupational and
Organizational Psychology, 86, 22–49.
Combs, J. G., Liu, Y., Hall, A., & Ketchen, D. J. (2006). How much
do high-performance work practices matter? A meta-analysis of their effects on organizational performance. Personnel
Psychology, 59, 501–528.
Conway, R., Maxwell, W., McClain, J. O., & Thomas, L. J. (1988).
The role of work-in-process inventory in serial production lines. Operations Research, 36, 229–241.
Cooper, H. M., Hedges, L. V., & Valentine, J. C. (2009). The Handbook of Research Synthesis and Meta-Analysis. New York: Russell Sage Foundation Publications.
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 206PDF page: 206PDF page: 206PDF page: 206 198
R
Crook, T. R., Ketchen, D. J., Combs, J. G., & Todd, S. Y. (2008).
Strategic resources and performance: A meta-analysis.
Strategic Management Journal, 29, 1141–1154.
Crosby, P. B. (1979). Quality is free: The art of making quality certain. New York: McGraw-Hill.
Croson, R., Schultz, K., Siemsen, E., & Yeo, M. L. (2013).
Behavioral operations: The state of the field. Journal of
Operations Management, 31, 1–5.
Cua, K. O., McKone, K. E., & Schroeder, R. G. (2001). Relationships
between implementation of TQM, JIT, and TPM and manufacturing performance. Journal of Operations
Management, 19, 675–694.
D’Andreamatteo, A., Ianni, L., Lega, F., & Sargiacomo, M. (2015).
Lean in healthcare: A comprehensive review. Health Policy,
119, 1197–1209.
Dal Pont, G., Furlan, A., & Vinelli, A. (2008). Interrelationships
among lean bundles and their effects on operational
performance. Operations Management Research, 1, 150–158.
Dallery, Y., & Gershwin, S. B. (1992). Manufacturing flow line
systems: a review of models and analytical results. Queueing
Systems, 12, 3–94.
Dallery, Y., & Liberopoulos, G. (2000). Extended kanban control
system: Combining kanban and base stock. IIE Transactions
(Institute of Industrial Engineers), 32, 369–386.
de Freitas, J. G., Costa, H. G., & Ferraz, F. T. (2017). Impacts of
Lean Six Sigma over organizational sustainability: A survey study. Journal of Cleaner Production, 156, 262–275.
Dean, J. W., & Bowen, D. E. (1994). Management Theory and
Total Quality: Improving Research and Practice through Theory Development. The Academy of Management Review, 19,
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 207PDF page: 207PDF page: 207PDF page: 207 199
R
Delasay, M., Ingolfsson, A., Kolfal, B., & Schultz, K. L. (2015). Load Effect On Service Times. SSRN Electronic Journal.
Deming, W. (1982). Out of the Crisis. Cambridge: Massachusetts Institute of Technology, Center for Advanced Engineering Study. Doerr, K. H., & Arreola-Risa, A. (2000). A worker-based approach
for modeling variability in task completion times. IIE
Transactions, 32, 625–636.
Doerr, K. H., Freed, T., Mitchell, T. R., Schriesheim, C. A., & Zhou, X. T. (2004). Work flow policy and within-worker and
between-workers variability in performance. The Journal of
Applied Psychology, 89, 911–921.
Doerr, K. H., Mitchell, T. R., Klastorin, T. D., & Brown, K. a. (1996).
Impact of material flow policies and goals on job outcomes.
Journal of Applied Psychology, 81, 142–152.
Doerr, K. H., Mitchell, T. R., Schriesheim, C. A., Freed, T., & Zhou, X. (2002). Heterogeneity and variability in the context of flow
lines. Academy of Management Review, 27, 594–607.
Dow, D., Samson, D., & Ford, S. (1999). Exploding the Myth: Do
All Quality Management Practices Contribute to Superior Quality Performance? Production and Operations
Management, 8, 1–27.
Fernandes, N. O., Thürer, M., Stevenson, M., & Carmo Silva, S. (2017). Load-Based POLCA: An Assessment of the Load
Accounting Approach. In Recent Advances in Information
Systems and Technologies (pp. 397–405). Springer, Cham.
Festinger, L. (1954). A Theory of Social Comparison Processes.
Human Relations, 7, 117–140.
Flynn, B. B. (1994). The Relationship between Quality
Management Practices , Infrastructure and Fast Product Innovation. Benchmarking for Quality Management &
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 208PDF page: 208PDF page: 208PDF page: 208 200
R
Flynn, B. B., Sakakibara, S., & Schroeder, R. G. (1995). Relationship
between JIT and TQM: Practices and Performance.
Academy of Management Journal, 38, 1325–1360.
Flynn, B. B., Schroeder, R. G., & Sakakibara, S. (1994). A
framework for quality management research and an associated measurement instrument. Journal of Operations
Management, 11, 339–366.
Flynn, B. B., Schroeder, R. G., & Sakakibara, S. (1995). The Impact
of Quality Management Practices on Performance and Competitive Advantage. Decision Sciences, 26, 659–691.
Forza, C., & Filippini, R. (1998). TQM impact on quality
conformance and customer satisfaction: A causal model.
International Journal of Production Economics, 55, 1–20.
Fotopoulos, C. B., & Psomas, E. L. (2009). The Impact of “Soft”
And “Hard” TQM Elements on Quality Management Results. International Journal of Quality & Reliability
Management, 26, 150–163.
Furlan, A., Dal Pont, G., & Vinelli, A. (2011). On the
complementarity between internal and external just-in-time bundles to build and sustain high performance
manufacturing. International Journal of Production Economics,
133, 489–495.
Furlan, A., Vinelli, A., & Dal Point, G. (2011). Complementarity
and lean manufacturing bundles: an empirical analysis.
International Journal of Operations & Production Management, 3, 835–850.
Furlan, A., Vinelli, A., & Pont, G. D. (2011). Complementarity and
lean manufacturing bundles: an empirical analysis.
International Journal of Operations & Production Management, 31, 835–850.
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 209PDF page: 209PDF page: 209PDF page: 209 201
R
Gaury, E. G. A., Kleijnen, J. P. C., & Pierreval, H. (2001). A
Methodology to Customize Pull Control Systems. Journal of
the Operational Research Society, 52, 789–799.
Gaury, E. G. A., Pierreval, H., & Kleijnen, J. P. C. (2000).
Evolutionary approach to select a pull system among Kanban, Conwip and Hybrid. Journal of Intelligent
Manufacturing, 11, 157–167.
Germs, R., & Riezebos, J. (2010). Workload balancing capability of
pull systems in MTO production. International Journal of
Production Research, 48, 2345–2360.
Gino, F., & Pisano, G. (2008). Toward a Theory of Behavioral
Operations. Manufacturing & Service Operations Management,
10, 676–691.
González-R, P. L., & Framinan, J. M. (2009). The pull evolution:
from Kanban to customised token-based systems. Production
Planning & Control, 20, 276–287.
González-R, P. L., Framinan, J. M. J. M., Pierreval, H., Gonzalez-R, P. L., Framinan, J. M. J. M., Pierreval, H. (2012). Token-based
pull production control systems: An introductory overview.
Journal of Intelligent Manufacturing, 23, 5–22.
Gstettner, S., & Kuhn, H. (1996). Analysis of production control
systems kanban and CONWIP. International Journal of
Production Research, 34, 3253–3273.
Hasle, P., Bojesen, A., Jensen, P. L., & Bramming, P. (2012). Lean
and the working environment: A review of the literature.
International Journal of Operations and Production Management, 32, 829–849.
Heimbach, I., Grahl, J., & Rothlauf, F. (2012). The effects of
state-dependent human behavior on the design of a serial line.
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 210PDF page: 210PDF page: 210PDF page: 210 202
R
Hertel, G., Deter, C., & Konradt, U. (2003). Motivation Gains in
Computer-Supported Groups. Journal of Applied Social
Psychology, 33, 2080–2105.
Hertel, G., Kerr, N. L., & Messé, L. A. (2000). Motivation gains in
performance groups: Paradigmatic and theoretical
developments on the Köhler effect. Journal of Personality and
Social Psychology, 79, 580–601.
Hines, P., Holweg, M., & Rich, N. (2004). Learning to evolve.
International Journal of Operations & Production Management, 24, 994–1011.
Hoffman, B. J., Blair, C. A., Meriac, J. P., & Woehr, D. J. (2007).
Expanding the criterion domain? A quantitative review of the OCB literature. Journal of Applied psychology, 92, 555–566.
Hopp, W. J., Iravani, S. M. R., & Yuen, G. Y. (2007). Operations
Systems with Discretionary Task Completion. Management
Science, 53, 61–77.
Hopp, W. J., & Spearman, M. L. (2004). To Pull or Not to Pull:
What Is the Question? Manufacturing & Service Operations
Management, 6, 133–148.
Hopp, W. J., & Spearman, M. L. (2008). Factory Physics (3rd ed.). Long Grove: Waveland Press, INC.
Hudson, S., McNamara, T., & Shaaban, S. (2014). Unbalanced lines:
where are we now? International Journal of Production
Research, 53, 1895–1911.
Huedo-Medina, T. B., Sánchez-Meca, J., Marín-Martínez, F., & Botella, J. (2006). Assessing heterogeneity in meta-analysis: Q
statistic or I2 index? Psychological Methods, 11, 193–206.
Hunter, J. E., & Schmidt, F. L. (2004). Methods of Meta-Analysis:
Correcting Error and Bias in Research Findings. CA: Sage.
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 211PDF page: 211PDF page: 211PDF page: 211 203
R
Jak, S. (2015). Methods for meta-analytic structural equation
modeling. In Meta-analytic structural equation modelling (pp.
15–23). Springer, Cham.
Jayaram, J., Ahire, S. L., & Dreyfus, L. P. (2010). Contingency
relationships of firm size, TQM duration, unionization, and industry context on TQM implementation - A focus on total effects. Journal of Operations Management, 28, 345–356.
Jitpaiboon, T., & Rao, S. S. (2007). A meta-analysis of quality
measures in manufacturing system. International Journal of
Quality & Reliability Management, 24, 78–102.
Juran, D. C., & Schruben, L. W. (2004). Using worker personality
and demographic information to improve system
performance prediction. Journal of Operations Management,
22, 355–367.
Juran, J. M. (1988). Juran on planning for quality. New York: Free Press.
Karau, S. J., & Williams, K. D. (1993). Social Loafing: A
Meta-Analytic Review and Theoretical Integration. Interpersonal
Relations and Group Processes, 65, 681–706.
Katok, E. (2011). Using Laboratory Experiments to Build Better
Operations Management Models. Foundations and Trends in
Technology, Information and Operations Management, 5, 1–86.
Kc, D. S., & Terwiesch, C. (2009). Impact of Workload on Service
Time and Patient Safety: An Econometric Analysis of Hospital Operations. Management Science, 55, 1486–1498.
Khanchanapong, T., Prajogo, D., Sohal, A. S., Cooper, B. K., Yeung, A. C. L., & Cheng, T. C. E. (2014). The unique and
complementary effects of manufacturing technologies and lean practices on manufacturing operational performance.
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 212PDF page: 212PDF page: 212PDF page: 212 204
R
Khojasteh-Ghamari, Y. (2009). A performance comparison between
Kanban and CONWIP controlled assembly systems. Journal
of Intelligent Manufacturing, 20, 751–760.
Kleijnen, J. P. C., & Gaury, E. G. A. (2003). Short-term robustness
of production management systems: A case study. European
Journal of Operational Research, 148, 452–465.
Krafcik, J. F. (1988). Triumph of the lean production system. Sloan
Management Review, 30, 41–53.
Krishnamurthy, A., & Suri, R. (2009). Planning and implementing
POLCA: a card-based control system for high variety or custom engineered products. Production Planning & Control,
20, 596–610.
Krishnamurthy, A., Suri, R., & Vernon, M. (2004). Re-examining the
performance of MRP and kanban material control strategies for multi-product flexible manufacturing systems.
International Journal of Flexible Manufacturing Systems, 16,
123–150.
Kumar, C. S., & Panneerselvam, R. (2007). Literature review of
JIT-KANBAN system. International Journal of Advanced
Manufacturing Technology, 32, 393–408.
Lage Junior, M., & Godinho Filho, M. (2010). Variations of the
kanban system: Literature review and classification.
International Journal of Production Economics, 125, 13–21.
Lakhal, L., Pasin, F., & Limam, M. (2006). Quality management
practices and their impact on performance. International
Journal of Quality & Reliability Management, 23, 625–646.
Land, M. J. (2009). Cobacabana (control of balance by card-based
navigation): A card-based system for job shop
control. International Journal of Production Economics, 117,
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 213PDF page: 213PDF page: 213PDF page: 213 205
R
Land, M. J., & Gaalman, G. J. C. (1996). Workload control concepts
in job shops - A critical assessment. International Journal of
Production Economics, 46–47, 535–548.
Land, M. J., & Gaalman, G. J. C. (1998). The performance of
workload control concepts in job shops: Improving the
release method. International Journal of Production Economics,
56–57, 347–364.
Landis, R. S. (2013). Successfully Combining Meta-analysis and
Structural Equation Modeling: Recommendations and Strategies. Journal of Business and Psychology, 28, 251–261.
Laursen, K., & Foss, N. J. (2000). New human resource
management practices, complementarities and the impact on innovation performance. Cambridge Journal of Economics, 27,
243–263.
Law, A.M. Kelton, W. D. (2000). Simulation Modeling and Analysis. New York: McGraw-Hill.
Leuschner, R., Charvet, F. F., & Rogers, D. S. (2013). A
Meta-Analysis of Logistics Customer Service. Journal of Supply
Chain Management, 49, 47–63.
Leuschner, R., Rogers, D. S., & Charvet, F. F. (2013). A
Meta-Analysis of Supply Chain Integration and Firm Performance.
Journal of Supply Chain Management, 49, 34–57.
Li, D., Eden, L., Hitt, M. A., & Ireland, R. D. (2008). Friends,
acquaintances, or strangers? Partner selection in R&D alliances. Academy of Management Journal, 51, 315–334.
Mackelprang, A. W., & Nair, A. (2010). Relationship between
just-in-time manufacturing practices and performance: A meta-analytic investigation. Journal of Operations Management, 28,
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 214PDF page: 214PDF page: 214PDF page: 214 206
R
Mackelprang, A. W., Robinson, J. L., Bernardes, E., & Webb, G. S. (2014). The relationship between strategic supply chain
integration and performance: A meta-analytic evaluation and implications for supply chain management research. Journal
of Business Logistics, 35, 71–96.
Meriac, J. P., Hoffman, B. J., & Woehr, D. J. (2014). A conceptual
and empirical review of the structure of assessment center dimensions. Journal of Management, 40, 1269–1296.
Mitchell, T. R., & Silver, W. S. (1990). Individual and group goals
when workers are interdependent: Effects on task strategies and performance. Journal of Applied Psychology, 75, 185–193.
Nair, A. (2006). Meta-analysis of the relationship between quality
management practices and firm performance-implications for quality management theory development. Journal of
Operations Management, 24, 948–975.
Naor, M., Goldstein, S. M., Linderman, K. W., & Schroeder, R. G. (2008). The role of culture as driver of quality management
and performance: Infrastructure versus core quality practices. Decision Sciences, 39, 671–702.
Netland, T. H. (2016). Critical success factors for implementing
lean production: the effect of contingencies. International
Journal of Production Research, 54, 2433–2448.
Oakland, J. S. (2008). Statistical process control. Oxford: Butterworth-Heinemann.
Öner-Közen, M., Minner, S., & Steinthaler, F. (2017). Efficiency of
paced and unpaced assembly lines under consideration of worker variability – A simulation study. Computers &
Industrial Engineering, 111, 516–526.
Ooi, K.-B., Arumugam, V., Teh, P.-L., & Chong, A. Y. (2008). TQM
practices and its association with production workers.
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 215PDF page: 215PDF page: 215PDF page: 215 207
R
Oosterman, B., Land, M. J., & Gaalman, G. J. C. (2000). Influence of
shop characteristics on workload control. International
Journal of Production Economics, 68, 107–119.
Orlicky, J. A. (1976). Rescheduling With Tomorrow’s MRP
System. Production & Inventory Management, 17, 38–48.
Pereira, G. M., & Osburn, H. G. (2007). Effects of participation in
decision making on performance and employee attitudes: A quality circles meta-analysis. Journal of Business and
Psychology, 22, 145–153.
Piercy, N., & Rich, N. (2009). Lean transformation in the pure
service environment: the case of the call service centre.
International Journal of Operations & Production Management, 29, 54–76.
Portioli Staudacher, A., & Tantardini, M. (2012). Lean
implementation in non–repetitive companies: a survey and analysis. International Journal of Services and Operations
Management, 11, 385–406.
Powell, S. G., & Schultz, K. L. (2004). Throughput in Serial Lines
with State-Dependent Behavior. Management Science, 50,
1095–1105.
Powell, T. C. (1995). Total quality management as competitive
advantage: A review and empirical study. Strategic
Management Journal, 16, 15–37.
Prakash, J., & Chin, J. F. (2015). Modified CONWIP systems: a
review and classification. Production Planning & Control, 26,
296–307.
Qu, X. (2007). Multivariate Data Analysis. Technometrics, 49, 103– 104.
Radnor, Z., & Walley, P. (2008). Learning to walk before we try to
run: Adapting lean for the public sector. Public Money and
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 216PDF page: 216PDF page: 216PDF page: 216 208
R
Riezebos, J. (2010). Design of POLCA material control systems.
International Journal of Production Research, 48, 1455–1477.
Samson, D., & Terziovski, M. (1999). The relationship between
total quality management practices and operational
performance. Journal of Operations Management, 17, 393–409.
Saraph, J. V., Benson, P. G., & Schroeder, R. G. (1989). An
Instrument for Measuring the Critical Factors of Quality Management. Decision Sciences, 20, 810–829.
Schroeder, R. G., Linderman, K. W., & Zhang, D. (2005). Evolution
of Quality: First Fifty Issues of Production and Operations Management. Production and Operations Management, 14,
468–481.
Schultz, K. L., Juran, D. C., & Boudreau, J. W. (1999). The Effects of
Low Inventory on the Development of Productivity Norms.
Management Science, 45, 1664–1678.
Schultz, K. L., Juran, D. C., Boudreau, J. W., McClain, J. O., Joseph, L., Thomas, L. J., & McClain, J. O. (1998). Modeling and
Worker Motivation in JIT Production Systems. Management
Science, 44, 1595–1607.
Schultz, K. L., McClain, J. O., & Thomas, L. J. (2003). Overcoming
the dark side of worker flexibility. Journal of Operations
Management, 21, 81–92.
Schultz, K. L., Schoenherr, T., & Nembhard, D. (2010). An Example
and a Proposal Concerning the Correlation of Worker Processing Times in Parallel Tasks. Management Science, 56,
176–191.
Seta, J. J. (1982). The impact of comparison processes on coactors’
task performance. Journal of Personality and Social
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 217PDF page: 217PDF page: 217PDF page: 217 209
R
Shadish, W. R., Cook, T. D., & Campbell, D. T. (2002). Experimental and Quasi-Experimental Designs For Generalized Causal Inference. Independence: Wadsworth Cengage Learning.
Shah, R., Chandrasekaran, A., & Linderman, K. (2008). In pursuit of
implementation patterns: the context of Lean and Six Sigma.
International Journal of Production Research, 46, 6679–6699.
Shah, R., & Ward, P. T. (2003). Lean manufacturing: Context,
practice bundles, and performance. Journal of Operations
Management, 21, 129–149.
Shah, R., & Ward, P. T. (2007). Defining and developing measures
of lean production. Journal of Operations Management, 25,
785–805.
Shenawy, E. El, Baker, T., & Lemak, D. J. (2007). A meta-analysis
of the effect of TQM on competitive advantage. International
Journal of Quality & Reliability Management, 24, 442–471.
Shunko, M., Niederhoff, J., & Rosokha, Y. (2017). Humans Are Not
Machines: The Behavioral Impact of Queueing Design on Service Time. Management Science.
Sivasubramaniam, N., Liebowitz, S. J., & Lackman, C. L. (2012).
Determinants of New Product Development Team
Performance: A Meta-analytic Review. Journal of Product
Innovation Management, 29, 803–820.
Slomp, J., Bokhorst, J. a. C., & Germs, R. (2009). A lean production
control system for high-variety/low-volume environments: a case study implementation. Production Planning & Control,
20, 586–595.
Sousa, R. (2003). Linking quality management to manufacturing
strategy: An empirical investigation of customer focus practices. Journal of Operations Management, 21, 1–18.
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 218PDF page: 218PDF page: 218PDF page: 218 210
R
Sousa, R., & Voss, C. A. (2001). Quality Management: Universal
or Context Dependent? Production and Operations
Management, 10, 383–404.
Sousa, R., & Voss, C. A. (2002). Quality management re-visited: A
reflective review and agenda for future research. Journal of
Operations Management, 20, 91–109.
Spearman, M. L., Woodruff, D. L., & Hopp, W. J. (1990). CONWIP,
a pull alternative to kanban. International Journal of
Production Research, 28, 879–894.
Steiner, I. D. (1972). Group process and productivity. New York. Academic Press.
Stentoft Arlbjørn, J., & Vagn Freytag, P. (2013). Evidence of lean: a
review of international peer‐reviewed journal articles.
European Business Review, 25, 174–205.
Stevenson, M., Hendry, L. C. L., Kingsman, B. G., Stevenson, M., & Hendry, L. C. L. (2005). A review of production planning and
control: the applicability of key concepts to the make-to-order industry. International Journal of Production Research,
43, 869–898.
Sugimori, Y., Kusunoki, K., & Cho, F. (1977). Toyota production
system and Kanban system Materialization of just-in-time and respect-for-human system. International Journal of
Production Research, 15, 553–564.
Suls, J., Martin, R., & Wheeler, L. (2002). Social comparison: Why,
with whom, and with what effect? Current Direction in
Psychological Science, 11, 159–163.
Suri, R. (1998). Quick response manufacturing : a companywide approach to reducing lead times. Productivity Press.
Tan, T., & Netessine, S. (2014). When Does the Devil Make Work?
An Empirical Study of the Impact of Workload on Worker Productivity. Management Science, 60, 1574–1593.
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 219PDF page: 219PDF page: 219PDF page: 219 211
R
Thomas, J. P., Whitman, D. S., & Viswesvaran, C. (2010).
Employeeproactivity in organizations: Ac omparative meta-analysis of emergent proactiveconstructs. Journal of
Occupational & Organizational Psychology, 83, 275–300.
Thürer, M., Fernandes, N. O., Stevenson, M., & Qu, T. (2017). On
the backlog-sequencing decision for extending the applicability of ConWIP to high-variety contexts: an
assessment by simulation. International Journal of Production
Research, 55, 4695–4711.
Thürer, M., Land, M. J., & Stevenson, M. (2014). Card-based
workload control for job shops: Improving
COBACABANA. International Journal of Production
Economics, 147, 180-188.
Thürer, M., Stevenson, M., & Protzman, C. (2016a). Card-based control systems for a lean work design : the fundamentals of kanban, ConWIP, POLCA, and COBACABANA. Boca Raton: CRC Press.
Thürer, M., Stevenson, M., & Protzman, C. W. (2016b). Card-based
production control : a review of the control mechanisms underpinning Kanban , ConWIP , POLCA and
COBACABANA systems. Production Planning & Control, 27,
1–15.
Thürer, M., Stevenson, M., & Silva, C. (2016). Three decades of
workload control research : a systematic review of the
literature of the literature. International Journal of Production
Research, 49, 6905–6935.
Tortorella, G. L., Miorando, R., & Marodin, G. (2017). Lean Supply
Chain Management: Empirical research on practices,
contexts and performance. International Journal of Production
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 220PDF page: 220PDF page: 220PDF page: 220 212
R
Van Eerde, W., & Thierry, H. (1996). Vroom’s Expectancy Models
and Work-Related Criteria: A Meta-Analysis. Journal of
Applied Psychology, 81, 575–586.
Vandaele, N. J., Van Nieuwenhuyse, I., Claerhout, D., & Cremmery, R. (2008). Load-Based POLCA: An Integrated Material
Control System for Multiproduct, Multimachine Job Shops.
Manufacturing & Service Operations Management, 10, 181–197.
Viswesvaran, C., & Ones, D. S. (1995). Theory testing: Combining
psychometric meta-analysis and structural equations modeling. Personnel Psychology, 48, 865–885.
Vroom, V. (1964). Expectancy theory. Work and motivation. San Francisco: Jossey-Bass.
Weber, B., & Hertel, G. (2007). Motivation gains of inferior group
members: A meta-analytical review. Journal of Personality
and Social Psychology, 93, 973–993.
Weber, B., Wittchen, M., & Hertel, G. (2009). Gendered ways to
motivation gains in groups. Sex Roles, 60, 731–744.
White, G. P. (1996). A meta-analysis model of manufacturing
capabilities. Journal of Operations Management, 14, 315–331.
White, R. E., Pearson, J. N., & Wilson, J. R. (1999). JIT
Manufacturing : A Survey of Implementations in Small and Large US Manufacturers, 45, 1–15.
Wittchen, M., Schlereth, D., & Hertel, G. (2007). Social
indispensability in spite of temporal and spatial separation: motivation gains in a sequential task during anonymous cooperation on the internet. International Journal of Internet
Science, 2, 12–27.
Zhang, G. P., & Xia, Y. (2013). Does quality still pay? A
reexamination of the relationship between effective quality management and firm performance. Production and
517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM 517640-L-bw-Ziengs-SOM Processed on: 14-3-2018 Processed on: 14-3-2018 Processed on: 14-3-2018
Processed on: 14-3-2018 PDF page: 221PDF page: 221PDF page: 221PDF page: 221 213
R
Ziengs, N., Riezebos, J., & Germs, R. (2012). Placement of effective
work-in-progress limits in route-specific unit-based pull systems. International Journal of Production Research, 50,
4358–4371.
Zimmermann, F., & Foerstl, K. (2014). A Meta-Analysis of the
“Purchasing and Supply Management Practice-Performance Link.” Journal of Supply Chain Management, 50, 37–54.
Zu, X. (2009). Infrastructure and core quality management
practices: how do they affect quality? International Journal of
Quality & Reliability Management, 26, 129–149.
Zu, X., Fredendall, L. D., & Douglas, T. J. (2008). The evolving
theory of quality management: The role of Six Sigma. Journal
of Operations Management, 26, 630–650.
Zu, X., Robbins, T. L., & Fredendall, L. D. (2010). Mapping the
critical links between organizational culture and TQM/Six Sigma practices. International Journal of Production