University of Groningen
Resistance spot welding of advanced high strength steels
Chabok, Ali
IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite from it. Please check the document version below.
Document Version
Publisher's PDF, also known as Version of record
Publication date: 2019
Link to publication in University of Groningen/UMCG research database
Citation for published version (APA):
Chabok, A. (2019). Resistance spot welding of advanced high strength steels: Mechanical properties and failure mechanisms. University of Groningen.
Copyright
Other than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons).
Take-down policy
If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.
Downloaded from the University of Groningen/UMCG research database (Pure): http://www.rug.nl/research/portal. For technical reasons the number of authors shown on this cover page is limited to 10 maximum.
155
Publications
1. Ali Chabok, Ellen van der Aa, Jeff Th.M. De Hosson and Yutao Pei, Mechanical behavior and failure mechanism of resistance spot welded DP1000 dual phase steel, Materials and Design, 124 (2017), 171-182.
2. Ali Chabok, Ellen van der Aa, Indranil Basu, Jeff Th.M. De Hosson and Yutao Pei, Effect of pulse scheme on the microstructural evolution, residual stress state and mechanical performance of resistance spot welded DP1000-GI steel, Science and Technology of Welding and Joining, 23 (2018), 649-658.
3. Ali Chabok, Emad Galinmoghaddam, Jeff Th.M. De Hosson and Yutao Pei, Micromechanical evaluation of DP1000-GI dual-phase high-strength steel resistance spot weld, Journal of Materials Science, 54 (2019), 1703–1715. 4. Ali Chabok, Ellen van der Aa, Jeff Th.M. De Hosson and Yutao Pei, A study on
the effect of chemical composition on the microstructural characteristics and mechanical performance of DP1000 resistance spot welds. Submitted to Journal of Materials Processing Technology.
5. Ali Chabok, Masoud Ahmadi, Huatang Cao, Ellen van der Aa, Mohammad Masoumi, Jeff Th.M. De Hosson and Yutao Pei, A new insight into the fracture behavior of 3rd generation advanced high strength steel resistance spot welds. Submitted to Acta Materialia.
6. Hamid Mousalou, Sasan Yazdani, Behzad Avishan, Naghi Parvini Ahmadi, Ali Chabok and Yutao Pei, Microstructural and mechanical properties of low-carbon ultra-fine bainitic steel produced by multi-step austempering process, Materials Science and Engineering A, 734 (2018), 329-337.
7. Huatang Cao, Xuanpu Dong, Ali Chabok, Jiancun Rao, Jeff Th.M. De Hosson and Yutao Pei, Hard-yet-tough high-vanadium hierarchical composite coating: Microstructure and mechanical properties, Materials Science and Engineering A, 736 (2018), 87-99.
8. Akbar Heidarzadeh, Tohid Saeid, Volker Klemm, Ali Chabok and Yutao Pei, Effect of stacking fault energy on the restoration mechanisms and mechanical properties of friction stir welded copper alloys, Materials and Design, 162 (2019), 185-197.
Publications
156
9. Akbar Heidarzadeh, Ali Chabok, Volker Kelmm and Yutao Pei, A novel approach to structure modification of brasses by combination of non-equilibrium heat treatment and friction stir processing, Metallurgical and Materials Transactions A, 50 (2019), https://doi.org/10.1007/s11661-019-05175-3 256.
10. Akbar Heidarzadeh, Ali Chabok and Yutao Pei, On the friction stir welding of Monel at different conditions: microstructural mechanisms and tensile behavior. Materials Letters, 245 (2019), in press.
