ETA 16/0487 van 30/06/2016 - Pagina 1 van 17
UL INTERNATIONAL (UK) LTD Wonersh House, Building C, The Guildway,
Old Portsmouth Road, Guildford. GU3 1 LR.
Verenigd Koninkrijk.
Lid van
www.eota.eu
Aangewezen overeenkomstig artikel 29 van (EU) Verordening nr. 305/2011 en lid van de EOTA (Europese Organisatie voor technische goedkeuringen, www.eota.eu)
Europese Technische
Goedkeuring ETA 16/0487
van 30/06/2016
Technische beoordelingsinstantie die de Europese technische goedkeuring afgeeft en aangewezen overeenkomstig artikel 29 van (EU) Verordening nr. 305/2011: UL International (UK) Ltd
Commerciële benaming van het bouwproduct MULCOL® MULTISEALANT A Productassortiment waartoe het bouwproduct
behoort Mulcol® MultiSeal System:
• Lineaire naad- en voegafdichtingen Fabrikant
Productiefabriek(en)
Mulcol International BV Arnesteinweg 18 4338 PD Middelburg Nederland
A/003
Deze Europese technische goedkeuring omvat 17 pagina's inclusief 1 bijlage die een
Deze Europese technische goedkeuring wordt afgegeven overeenkomstig (EU) Verordening nr. 305/2011, op basis van
integrerend deel van dit document uitmaakt.
ETAG 026-3, uitgave van 2011, gebruikt als Europees goedkeuringsdocument (EGD)
De vertalingen van deze Europese technische goedkeuring naar andere talen moeten volledig in overeenstemming zijn met het oorspronkelijk afgegeven document en moeten als zodanig worden aangeduid. Het originele document is in het Engels beschikbaar.
Deze Europese technische goedkeuring moet in haar geheel worden gecommuniceerd, inclusief langs elektronische weg. Ze mag echter gedeeltelijk worden gereproduceerd, met schriftelijke toestemming van de betreffende technische goedkeuringsinstantie.
Een gedeeltelijke reproductie moet als zodanig worden aangeduid.
ETA 16/0487 van 30/06/2016 - Pagina 2 van 17 Inhoudsopgave
I. SPECIFIEKE GEDEELTES VAN DE EUROPESE TECHNISCHE GOEDKEURING ... 3 1 Technische beschrijving van het product ... 3 2 Specificaties voor het beoogde gebruik volgens het toepasselijke Europese goedkeuringsdocument
(hierna EGD genoemd): ETAG 026-2 ... 3 3 Prestaties van het product en verwijzingen naar de gebruikte goedkeuringsmethodes ... 4 4 HET SYSTEEM VOOR DE GOEDKEURING EN VERIFICATIE VAN DE PRESTATIEBESTENDIGHEID (HIERNA
BVPB GENOEMD), GEBASEERD OP JURIDISCHE REFERENTIES ... 5 5 Technische details die nodig zijn voor de toepassing van het systeem voor de goedkeuring en
verificatie van de prestatiebestendigheid (AVCP-systeem), zoals voorzien in het toepasselijke Europese beoordelingsdocument ... 5 6 Afgegeven op: ... 6 BIJLAGE A - Brandwerendheidsclassificatie - Mulcol® Multisealant A………7 A.1 Flexibele of starre wandconstructies conform I.2.1 met een wanddikte van minimaal 100 mm…..7
A.1.1 Lineaire voegafdichting, tussen kop van flexibele wand en onderkant van betonnen vloer en……7 tussen verticaal uiteinde van flexibele wand en betonnen wand………9 A.2 Starre wandconstructies conform I.2.1 met een wanddikte van minimaal 150 mm……….10 A.2.1 Lineaire voegafdichting, tussen kop van starre wand en onderkant van betonnen vloer en……..10 tussen verticaal uiteinde van gemetselde wand en gemetselde wand………13 A.3 Starre vloerconstructies conform I.2.1 met een vloerdikte van minimaal 150 mm………..15 A.3.1 Lineaire voeg- of naadafdichting, tussen vloerplaten of tussen vloerplaat en wand………15
ETA 16/0487 van 30/06/2016 - Pagina 3 van 17
I. SPECIFIEKE GEDEELTES VAN DE EUROPESE TECHNISCHE GOEDKEURING 1 Technische beschrijving van het product
1) Mulcol® Multisealant A is een afdichtingsmiddel dat wordt gebruikt voor het vormen van lineaire naadafdichtingen ingeval van naden in wand- en vloerconstructies en lineaire voegafdichtingen ingeval van aangrenzende wand- en vloerconstructies.
2) Mulcol® Multisealant A wordt geleverd in vloeibare vorm in cartridges van 310 ml en in folie verpakte worsten van 600 mm. Het afdichtingsmiddel wordt in de opening in het/de scheidingselement(en) gespoten, tot een specifieke diepte waarbij gebruik gemaakt van Mulcol® Multitherm of mineraalvezelisolatie als rugvulling.
3) Mulcol® Multisealant A bevat geen kankerverwekkende of mutagene stoffen, brandvertragers of antibacteriële stoffen.
4) De aanvrager heeft schriftelijk verklaard dat Mulcol® Multisealant A geen stoffen bevat die als gevaarlijk geclassificeerd moeten worden conform Richtlijn 67/548/EEG en (EG) verordening nr. 1272/2008 en vermeld op de 'Indicatieve lijst van gevaarlijke stoffen' van de EGDS (Expert Group on Dangerous Substances). Hierbij is rekening gehouden met de installatievoorwaarden van het bouwproduct en de uitstootscenario's die daaruit voortkomen.
In aanvulling op de specifieke clausules die met betrekking tot gevaarlijke stoffen zijn opgenomen in deze Europese technische goedkeuring, kunnen er andere voorwaarden van toepassing zijn op de producten die onder het toepassingsgebied vallen (bijv. overgenomen Europese wetgeving en nationale wetten, regelgevingen en bestuursrechtelijke voorschriften). Om aan de bepalingen van de EU-richtlijn voor bouwproducten te voldoen, moet ook aan deze eisen worden voldaan, wanneer en waar deze van toepassing zijn.
5) De gebruikscategorie van Mulcol® Multisealant A met betrekking tot BWR 3 (Hygiëne, gezondheid en omgeving) is IA1, S/W3.
2 Specificaties voor het beoogde gebruik volgens het toepasselijke Europese goedkeuringsdocument (hierna EGD genoemd): ETAG 026-2
Gedetailleerde informatie en gegevens zijn opgenomen in bijlage A.
Het beoogde gebruik van Mulcol® Multisealant A is het herstellen van de brandveiligheidsprestatie van naden en voegen in en tussen flexibele wand- en starre wandconstructies, naden in en voegen tussen starre
vloerconstructies.
1) Het Mulcol® Multisealant A systeem kan worden gebruikt voor het voorzien van een naad- of voegafdichting in de volgende specifieke bouwelementen:
Flexibele wanden:
Starre wanden:
Starre vloeren:
De minimale wanddikte moet 100 mm zijn en de wand moet bestaan uit stalen stijlen met aan weerszijden minimaal 2 lagen beplating met een dikte van 12,5 mm.
De minimale wanddikte moet 150 mm zijn en de wand moet bestaan uit beton, cellenbeton of metselwerk, met een minimale dichtheid van 650 kg/m3. De minimale vloerdikte moet 150 mm zijn en de vloer moet bestaan uit beton of cellenbeton, met een minimale dichtheid van 650 kg/m3.
De draagconstructie moet worden geclassificeerd overeenkomstig EN 13501-2 voor de gestelde brandweerstand.
2) Het Mulcol® Multisealant A systeem kan worden gebruikt voor het voorzien van een lineaire voeg- of naadafdichting met specifieke draagconstructies en ondergronden (zie bijlage A voor nadere details).
3) De maximaal toegestane breedte van de voeg/naad voor het Mulcol® Multisealant A systeem is 100 mm.
ETA 16/0487 van 30/06/2016 - Pagina 4 van 17
4) De maximale bewegingscapaciteit van het Mulcol® Multisealant A systeem is < 12,5%.
5) De bepalingen in deze Europese technische goedkeuring zijn gebaseerd op een verwachte levensduur van het Mulcol® Multisealant A systeem van 30 jaar, vooropgezet dat wordt voldaan aan de voorwaarden zoals vermeld in paragraaf 4.2/5.1/5.2 voor verpakking, transport, opslag, installatie, gebruik, reparatie. De indicaties met betrekking tot de levensduur kunnen niet worden opgevat als een garantie van de fabrikant, maar moeten uitsluitend worden beschouwd als een middel om de juiste producten te kiezen in verhouding tot de verwachte economisch redelijke levensduur van de bouwwerken.
6) Type Z2: Bedoeld voor gebruik in binnenomstandigheden met een vochtigheidsgraad van maximaal 85%, met uitsluiting van temperaturen lager dan 0 °C, zonder blootstelling aan regen of UV.
3 Prestaties van het product en verwijzingen naar de gebruikte beoordelingsmethodes Producttype:
Afdichtingsmiddel Beoogd gebruik:
Lineaire voeg- en naadafdichting Fundamentele eis voor
bouwwerken Essentieel kenmerk Prestatie
Mechanische weerstand en stabiliteit
- Geen Niet relevant
Veiligheid in geval van brand
EN 13501-1 Brandgedrag Klasse D-s1, d1
EN 13501-2 Brandwerendheid Bijlage A
Hygiëne, gezondheid en omgeving
EN 1026:2000 Luchtdoorlatendheid
(materiaaleigenschap) Geen prestatie bepaald ETAG 026-3, bijlage C Waterdoorlatendheid
(materiaaleigenschap) Geen prestatie bepaald Verklaring van de fabrikant Vrijkomen van gevaarlijke
stoffen Verklaring van de fabrikant Gebruiksveiligheid
EOTA TR 001:2003 Mechanische weerstand en
stabiliteit Geen prestatie bepaald
EOTA TR 001:2003 Weerstand tegen
inslag/beweging Geen prestatie bepaald
EOTA TR 001:2003 Verlijming Geen prestatie bepaald
Bescherming tegen lawaai EN 10140-2/EN ISO 717-1 Isolatie tegen luchtgedragen
geluid Rw(C;Ctr)= 62 (-1;-5) dB*
EN 10140-2/EN ISO 717-2 Isolatie tegen contactgeluiden Geen prestatie bepaald Energiebesparing en thermische isolatie
EN 12664, EN 12667 of EN
12939 Thermische eigenschappen Geen prestatie bepaald EN ISO 12572 EN 12086 Waterdampdoorlatendheid Geen prestatie bepaald
Algemene aspecten betreffende de gebruiksgeschiktheid EOTA TR 024:2009, clausule
3.1.11 & 3.1.12 Duurzaamheid en onderhoud Z2
* Op een diepte van 12 mm
ETA 16/0487 van 30/06/2016 - Pagina 5 van 17
4 HET SYSTEEM VOOR DE GOEDKEURING EN VERIFICATIE VAN DE PRESTATIEBESTENDIGHEID (HIERNA BVPB GENOEMD), GEBASEERD OP JURIDISCHE REFERENTIES
In overeenstemming met besluit 1999/454/EG - beschikking van de Commissie van 22 juni 1999 betreffende de procedure voor de conformiteitsverklaring van voor de bouw bestemde producten overeenkomstig artikel 20(2) van Richtlijn 89/106/EEG van de Raad voor producten met brandvertragende, tegen brand afdichtende en brandwerende eigenschappen, bekendgemaakt in het Publicatieblad van de Europese Gemeenschappen (OJEU) L178/52 van 14/07/1999, zie http://eur-lex.europa.eu/JOIndex.do) van de Europese Commissie1, zoals gewijzigd, is/zijn het/de syste(e)m(en) voor de goedkeuring en verificatie van de bestendigheid van de prestaties (zie bijlage V op Verordening (EU) nr. 305/2011) vermeld in de volgende tabel(len) van toepassing.
Product(en) Beoogd(e) gebruik(en) Niveau(s) of klasse(n) Syste(e)m(en) Producten met
brandvertragende en tegen brand afdichtende
eigenschappen
Voor
brandcompartimentering en/of brandbeveiliging of
brandprestaties
Alle 1
5 Technische details die nodig zijn voor de toepassing van het systeem voor de goedkeuring en verificatie van de prestatiebestendigheid (AVCP-systeem), zoals voorzien in het toepasselijke Europese goedkeuringsdocument Taken van de fabrikant:
Productiecontrole in de fabriek
De fabrikant moet permanente interne productiecontrole uitvoeren. Alle door de fabrikant gevolgde beginselen, eisen en bepalingen moeten systematisch worden geregistreerd in de vorm van geschreven voorschriften en procedures, met inbegrip van verkregen resultaten. Dit productiecontrolesysteem moet waarborgen dat het product in overeenstemming is met deze Europese technische goedkeuring.
De fabrikant mag uitsluitend gebruikmaken van basismaterialen, grondstoffen en samenstellende materialen die zijn vermeld in de technische documentatie van deze Europese technische goedkeuring.
De productiecontrole in de fabriek moet overeenkomen met het controleplan van 8 april 2013 inzake de Europese technische goedkeuring ETA 16/0487, afgegeven op 30/06/2016, die deel uitmaakt van de technische
documentatie van deze Europese technische goedkeuring. Het 'controleplan' is vastgelegd in de context van het productiecontrolesysteem in de fabriek, beheerd door de fabrikant en gedeponeerd bij UL International (UK) Ltd.
De resultaten van de productiecontrole in de fabriek zullen worden geregistreerd en geëvalueerd in overeenstemming met de bepalingen van het controleplan.
1 Publicatieblad van de Europese Gemeenschappen L178/52 van 14/7/1999
ETA 16/0487 van 30/06/2016 - Pagina 6 van 17
Overige taken van de fabrikant Extra informatie
De fabrikant moet een technisch datablad en een installatievoorschrift verstrekken met de volgende minimale informatie:
a) Technisch datablad:
• Toepassingsgebied:
• Bouwelementen die geschikt zijn voor de lineaire voegafdichting, type en eigenschappen van de bouwelementen zoals minimale dikte, dichtheid en - in geval van lichtgewichtconstructies - de bouweisen.
• Beperkingen in omvang, minimale dikte enz. van de voegafdichting.
• Constructie van de lineaire voegafdichting met inbegrip van de noodzakelijke componenten en aanvullende producten (bijv. aanvulmateriaal) met duidelijke vermelding of deze generiek of specifiek zijn.
b) Installatievoorschrift:
• De te volgen stappen
• Procedure in geval van renovatie
• Bepalingen inzake onderhoud, reparatie en vervanging
6 Afgegeven op:
30 juni 2016
Verslag door: Herzien door:
C. Johnson Hoofdingenieur
Building and Life Safety Technologies
C. W. Miles
Businessmanager - Europa & Latijns-Amerika Building and Life Safety Technologies
Voor en namens UL International (UK) Ltd
100 mm
≥
Flexible wall Concrete floor
Stone wool backing Mulcol® Multisealant A
(See table 1.1 for specifications width and depth)
(See table 1.1 for specifications depth)
Sealant to both sides of the wall
150 mm
≥A 1.1 Linear joint seals, between head of flexible wall and soffit of concrete floor
Substrate Classification Sealant depth Backing Maximum seal
Plasterboard wall / Concrete floor EI 120 - T - X - F - W 00 to 30 12.5 mm 12.5 mm Stone wool insulation, 35 kg/m³ plus 50 mm steel
partition head track 30 mm
15-2-2017 Unit of measure :
American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development
Linear joint seals
Draftsman : R.M.
FW-JNT-MSA2.1.2 mm A4
Scale : 1:5
Mulcol
®Multisealant A
Flexible wall construction according to I.2.1
Annex A - Resistance to fire classification - Mulcol
®Multisealant A
ETA 16/0487 of 30/06/2016 – page 7 of 17
100 mm
≥
Flexible wall Concrete floor
Mulcol® Multisealant A
(See table 1.1.1 for specifications width and depth)
Sealant to both sides of the wall
150 mm
≥A 1.1.1 Linear joint seals, between head of flexible wall and soffit of concrete floor
Substrate Classification Sealant depth Backing Maximum seal
Plasterboard wall / Concrete floor EI 120 - T - X - F - W 00 to 30 25 mm 50 mm steel partition head track 30 mm 15-2-2017
Unit of measure : American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development
Linear joint seals
Draftsman : R.M.
FW-JNT-MSA2.1.2 mm A4
Scale : 1:5
Mulcol
®Multisealant A
Flexible wall construction according to I.2.1
Annex A - Resistance to fire classification - Mulcol
®Multisealant A
ETA 16/0487 of 30/06/2016 – page 8 of 17
100 mm
≥Flexible wall
Concrete wall
Stone wool backing
Mulcol® Multisealant A
(See table 1.1.2 for specifications width and depth)
Sealant to both sides of the wall
(See table 1.1.2 for specifications depth)
Variable thickness
A 1.1.2 Linear joint seals, between vertical end of flexible wall and concrete wall
Substrate Classification Sealant depth Backing Maximum seal
Plasterboard wall* / Concrete wall EI 120 - V - X - F - W 00 to 30 12.5 mm 20 mm Stone wool insulation,
35 kg/m³ 30 mm
*Maximum partition/wall height of 3 metres 15-2-2017
Unit of measure : American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development
Linear joint seals
Draftsman : R.M.
FW-JNT-MSA2.2.2 mm A4
Scale : 1:5
Mulcol
®Multisealant A
Flexible wall construction according to I.2.2
Annex A - Resistance to fire classification - Mulcol
®Multisealant A
ETA 16/0487 of 30/06/2016 – page 9 of 17
Concrete floor
Mulcol® Multisealant A
(See table A 2.1 for specification width and depth)
Stone wool backing Sealant to either side of the wall
or any position in between
(See table A 2.1 for specification depth)
Masonry wall
150 mm
≥
≥
150 mm
A 2.1 Linear joint or gap seal, between head of rigid wall and soffit of concrete floor
Substrate Classification Sealant depth Backing Maximum seal
Masonry wall to Concrete floor E 240 - T - X - F - W 00 to 30
EI 60 - T - X - F - W 00 to 30 25 mm 20 mm Stone wool
insulation, 40 kg/m³ 30 mm
Masonry wall to Concrete floor E 240 - T - X - F - W 50
EI 60 - T - X - F - W 50 10 mm 60 mm Stone wool
insulation, 33 kg/m³ 50 mm 15-2-2017
Unit of measure : American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development Draftsman : R.M.
RW-JNT-MSA1.1.2 mm A4
Scale : 1:5
Linear joint or gap seal Mulcol
®Multisealant A
Rigid wall construction according to I.2.1
Annex A - Resistance to fire classification - Mulcol
®Multisealant A
ETA 16/0487 of 30/06/2016 – page 10 of 17
Concrete floor
Mulcol® Multisealant A
(See table A 2.1.2 for specification width and depth)
Stone wool backing Sealant to both sides of the wall
(See table A 2.1.2 for specification depth)
Masonry wall
150 mm
≥
≥
150 mm
A 2.1.2 Linear joint or gap seal, between head of masonry wall and soffit of concrete floor
Substrate Classification Sealant depth Backing Maximum seal
Masonry wall / Concrete floor EI 240 - T - X - F - W 00 to 30 15 mm 20 mm Stone wool
insulation, 40 kg/m³ 30 mm 15-2-2017
Unit of measure : American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development Draftsman : R.M.
RW-JNT-MSA2.1.2 mm A4
Scale : 1:5
Linear joint or gap seal Mulcol
®Multisealant A
Rigid wall construction according to I.2.1
Annex A - Resistance to fire classification - Mulcol
®Multisealant A
ETA 16/0487 of 30/06/2016 – page 11 of 17
Concrete floor
Mulcol® Multisealant A
(See table A 2.1.4 for specification width and depth)
Sealant to either side of the wall or any position in between
Mulcol® Multitherm
(See table A 2.1.4 for specification depth)
Masonry wall
150 mm
≥
≥
150 mm
A 2.1.4 Linear joint or gap seal, between head of masonry wall and soffit of concrete floor
Substrate Classification Sealant depth Backing Maximum seal
Masonry wall / Concrete floor E 240 - T - X - F - W 00 to 30
EI 120 - T - X - F - W 00 to 30 25 mm 48 mm Mulcol®
Multitherm 30 mm
15-2-2017 Unit of measure :
American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development Draftsman : R.M.
RW-JNT-MSA1.1.2 mm A4
Scale : 1:5
Linear joint or gap seal Mulcol
®Multisealant A
Rigid wall construction according to I.2.1
Annex A - Resistance to fire classification - Mulcol
®Multisealant A
ETA 16/0487 of 30/06/2016 – page 12 of 17
150 mm
≥
Masonry wall
Mulcol® Multisealant A
(See table A 2.1.3 for specification width and depth)
Stone wool backing Sealant to both sides of the wall
(See table A 2.1.3 for specification depth)
Masonry wall
150 mm
≥A 2.1.3 Linear joint or gap seal, between vertical end off masonry wall and masonry wall
Substrate Classification Sealant depth Backing Maximum seal
Masonry wall / Masonry or concrete wall EI 240 - V - X - F - W 00 to 30 15 mm 20 mm Stone wool
insulation, 40 kg/m³ 30 mm 15-2-2017
Unit of measure : American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development Draftsman : R.M.
RW-JNT-MSA2.2.2 mm A4
Scale : 1:5
Linear joint or gap seal Mulcol
®Multisealant A
Rigid wall construction according to I.2.1
Annex A - Resistance to fire classification - Mulcol
®Multisealant A
ETA 16/0487 of 30/06/2016 – page 13 of 17
150 mm
≥
Masonry wall
Mulcol® Multisealant A
(See table A 2.1 for specification width and depth)
Stone wool backing Sealant to either side of the wall or any position in between
(See table A 2.1 for specification depth)
Masonry wall
150 mm
≥A 2.1.1 Linear joint or gap seal, between vertical end off masonry wall and masonry wall
Substrate Classification Sealant depth Backing Maximum seal
Masonry wall / Masonry or concrete wall EI 120 - V - X - F - W 50 10 mm 60 mm Stone wool
insulation, 33 kg/m³ 50 mm 15-2-2017
Unit of measure : American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development Draftsman : R.M.
RW-JNT-MSA1.2.2 mm A4
Scale : 1:5
Linear joint or gap seal Mulcol
®Multisealant A
Rigid wall construction according to I.2.1
Annex A - Resistance to fire classification - Mulcol
®Multisealant A
ETA 16/0487 of 30/06/2016 – page 14 of 17
Mulcol® Multisealant A
(See table 3.1 for specifications width and depth and position)
Masonry wall
Mulcol® Multitherm backing
(See table 3.1 for specifications depth)
Concrete Floor
Concrete Floor
Mulcol® Multisealant A
(See table 3.1 for specifications width and depth and position)
Mulcol® Multitherm backing
(See table 3.1 for specifications depth)
150 mm
≥150 mm
≥Concrete floor
A 3.1 Linear joint or gap seal, between floor slabs or between floor slab and wall
Substrate Classification Sealant depth Backing Maximum seal
Concrete floor / Concrete floor E 120 - H - X - F - W 00 to 100
EI 60 - H - X - F W 00 to 100 25 mm
(any position) 25 mm Mulcol®
Multitherm insulation 100 mm Concrete floor / Masonry wall EI 180 - H - X - F - W 00 to 100 25 mm
(Top face) 25 mm Mulcol®
Multitherm insulation 100 mm 15-2-2017
Unit of measure : American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development Draftsman : R.M.
RF-JNT-MSA1.5.2 mm A4
Scale : 1:5
Linear joint or gap seals Mulcol
®Multisealant A
Rigid floor construction according to I.2.2
Annex A - Resistance to fire classification - Mulcol
®Multisealant A
ETA 16/0487 of 30/06/2016 – page 15 of 17
150 mm
≥Mulcol® Multisealant A
(See table 3.1.1 for specifications width and depth and position)
Stone wool backing
(See table 3.1.1 for specifications depth)
Concrete Floor
Masonry wall
Mulcol® Multisealant A
(See table 3.1.1 for specifications width and depth and position)
Stone wool backing
(See table 3.1.1 for specifications depth)
Concrete floor Concrete floor
150 mm
≥A 3.1.1 Linear joint or gap seal, between floor slabs or between floor slab and wall
Substrate Classification Sealant depth Backing Maximum seal
Concrete floor / concrete floor or masonry wall EI 120 - H - X - F - W 00 to 100 15 mm
(Both sides) 25 mm Stone wool
insulation, 40 kg/m³ 100 mm Concrete floor / concrete floor or masonry wall EI 180 - H - X - F - W 00 to 100 15 mm
(Both sides) 25 mm Stone wool
insulation, 140 kg/m³ 100 mm Concrete floor / concrete floor or masonry wall EI 240 - H - X - F - W 00 to 30 15 mm
(Both sides) 25 mm Stone wool
insulation, 35 kg/m³ 30 mm 15-2-2017
Unit of measure : American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development Draftsman : R.M.
RF-JNT-MSA2.5.2 mm A4
Scale : 1:5
Linear joint or gap seals Mulcol
®Multisealant A
Rigid floor construction according to I.2.2
Annex A - Resistance to fire classification - Mulcol
®Multisealant A
ETA 16/0487 of 30/06/2016 – page 16 of 17
Mulcol® Multisealant A
(See table 3.1.2 for specifications width and depth and position)
Stone wool backing
(See table 3.1.2 for specifications depth)
Concrete Floor
Masonry wall
(See table 3.2 for specifications depth)
Stone wool backing
Concrete Floor
Mulcol® Multisealant A
(See table 3.1.2 for specifications width and depth and position)
Concrete floor
150 mm
≥150 mm
≥A 3.1.2 Linear joint or gap seal, between floor slabs or between floor slab and wall
Substrate Classification Sealant depth Backing Maximum seal
Concrete floor / concrete floor or masonry wall EI 240 - H - X - F - W 100 10 mm
(Top face) 90 mm Stone wool
insulation 33 kg/m³ 100 mm 15-2-2017
Unit of measure : American projection
Date :
Company : Mulcol International B.V.
Department : Research & Development Draftsman : R.M.
RF-JNT-MSA1.5.2 mm A4
Scale : 1:5