• No results found

Acoustic measurement of bubble size and position in an ink jet printhead

N/A
N/A
Protected

Academic year: 2021

Share "Acoustic measurement of bubble size and position in an ink jet printhead"

Copied!
1
0
0

Bezig met laden.... (Bekijk nu de volledige tekst)

Hele tekst

(1)ACOUSTICS2008/1358 Acoustic measurement of bubble size and position in an ink jet printhead A. Van Der Bosa , R. Jeurissena , J. De Jongb , D. Lohsea , M. Versluisa , H. Reintenb , M. Van Den Bergb , H. Wijshoffb and R. Stevensa a Physics of Fluids, University of Twente, P.O. Box 217, 7500 AE Enschede, Netherlands b Oce Technology, P.O. Box 101, 5900 MA Venlo, Netherlands An acoustic measurement method of the volume and position of a bubble in an ink jet print head, is presented. The system is driven by a pi¨ezo actuator. The actuator is also used as a sensor by measuring the current through the pi¨ezo. The method used to determine the volume and position of the bubble is based on a linear model of the investigated system. This model predicts the current for a given position and volume of the bubble. The inverse problem is to infer the position and volume of the bubble from the measured current through the pi¨ezo actuator. The solution of the inverse problem is demonstrated. Thus, an acoustical measurement method of these properties is obtained. The results from the acoustical measurement method correspond closely with results from optical measurements. This indicates validity of the presented method..

(2)

Referenties

GERELATEERDE DOCUMENTEN

Saam met die handleiding moet n amptelike brief aan die skoolhoof gestuur word wat aantoon watter student(e) die skoal besoek. Albei bo- genoemde stukke moet

The combined information shows that the synthesis at 13 °C yields very little HKUST-1 due to slow nucleation and growth, while at 25 °C, more HKUST-1 is formed as both islands

This commentary considers the risks and opportunities of the CE for low- and middle-income countries (LMICs) in the context of the Sustainable Development Goals (SDGs),

Conform de Bijzondere Voorwaarden en de afspraken gemaakt op de startvergadering van 7-02-2013 bestond deze prospectie uit de evaluatie van het gebied door middel van het aanleggen

Materiaal Debitagemateriaal in silex onregelmatige kernen 2 kernfragment 1 gedebiteerde keien 22 klingen(tjes) 31 proximale klingfragmenten 18 mediane klingfragmenten 7

The author sees in Noah a man from the antediluvian world who was protected and preserved to be the first man of the new world after the Flood. the waters) the world of

• Draagt medeverantwoorde- lijkheid voor het aansturen van processen en de ontwik- keling van collega’s....

• Doclo S., Moonen M., “Design of broadband beamformers robust against gain and phase errors in the microphone array characteristics”, IEEE Transactions on Signal Processing ,