• No results found

Form: CPL(A) Skill Test

N/A
N/A
Protected

Academic year: 2022

Share "Form: CPL(A) Skill Test"

Copied!
3
0
0

Bezig met laden.... (Bekijk nu de volledige tekst)

Hele tekst

(1)

FLIGHT TEST SCHEDULE

CPL(A): SKILL TEST

Based on appendix 4 to Part-FCL

Examiner:

Version Date:02-08-2016 Licence number applicant:

Page 1 of 3 SECTION 1

PRE-FLIGHT OPERATIONS AND DEPARTURE

Use of checklist, airmanship, control of aeroplane by external visual reference, anti/de-icing procedures and principles of threat and error management apply in all sections.

Exam Re-Exam

a

Pre-flight, including:

Flight planning, Documentation, Mass and balance determination, W eather brief , NOTAMS

M

b Aeroplane inspection and servicing M

c Taxiing and take-off M

d Performance considerations and trim M

e Aerodrome and traffic pattern operations M

f Departure procedure, altimeter setting, collision avoidance (lookout) M

g ATC liaison – compliance, R/T procedures M

SECTION 2 GENERAL AIRWORK

Exam Re-Exam

a Control of the aeroplane by external visual reference, including straight and level, climb, descent, lookout

M

b Flight at critically low airspeed including recognition of and recovery from incipient and full stalls

M

c Turns, including turns in landing configuration. Steep turns 45° M

d Flight at critically high airspeeds, including recognition of and recovery from spiral dives M

e Flight by reference solely to instruments, including:

i. Level flight, cruise configuration, control of heading, altitude and airspeed

ii. Climbing and descending turns with 10°– 30° bank

iii. Recoveries from unusual attitudes

iv. Limited panel instruments

M

f ATC liaison – compliance, R/T procedures M

(2)

FLIGHT TEST SCHEDULE

CPL(A): SKILL TEST

Based on appendix 4 to Part-FCL

Page 2 of 3 SECTION 3 EN-ROUTE PROCEDURES

Exam Re-Exam

a Control of aeroplane by external visual reference, including cruise configuration Range / Endurance considerations

M

b Orientation, map reading M

c Altitude, speed, heading control, lookout M

d Altimeter setting. ATC liaison – compliance, R/T procedures M

e Monitoring of flight progress, flight log, fuel usage, assessment of track error and re - establishment of correct tracking

M

f Observation of weather conditions, assessment of trends, diversion planning M

g Tracking, positioning (NDB or VOR), identification of facilities (instrument flight).

Implementation of diversion plan to alternate aerodrome (visual flight)

M

SECTION 4

APPROACH AND LANDING PROCEDURES

Exam Re-Exam

a Arrival procedures, altimeter setting, checks, lookout M

b ATC liaison – compliance, R/T procedures M

c Go-around action from low height M

d Normal landing, crosswind landing (if suitable conditions) M

e Short field landing M

f Approach and landing with idle power (single -engine only) M

g Landing without use of flaps M

h Post flight actions M

Examiner:

Version Date: 02-08-2016 Licence number applicant:

(3)

FLIGHT TEST SCHEDULE

CPL(A): SKILL TEST

Based on appendix 4 to Part-FCL

Page 3 of 3 SECTION 5

ABNORMAL AND EMERGENCY PROCEDURES

This section may be combined with Sections 1 through 4

Exam Re-Exam

a Simulated engine failure after take-off (at a safe altitude), fire drill M

b Equipment malfunctions

Including alternative landing gear extension, electrical and brake failure

M

c Forced landing (simulated) M

d ATC liaison: compliance, R/T procedures M

e Oral questions M

SECTION 6

SIMULATED ASYMMETRIC FLIGHT AND RELEVANT CLASS/TYPE ITEMS

This section may be combined with Sections 1 through 5.

Exam Re-Exam

a Simulated engine failure during take-off (at a safe altitude unless carried out in a FFS

)

M

b Asymmetric approach and go-around M

c Asymmetric approach and full stop landing M

d Engine shutdown and restart M

e ATC liaison – compliance, R/T procedures, Airmanship M

f As determined by the Flight Examiner – any relevant items of the class/type rating skill test to include, if applicable:

i. Aeroplane systems including handling of autopilot ii. Operation of pressurisation system

iii. Use of de-icing and anti-icing system

M

g Oral questions M

Examiner:

Version Date: 02-08-2016 Licence number applicant:

Referenties

GERELATEERDE DOCUMENTEN

Chemical vapour deposition is explained and the basic theoretical background as well as the instrumental details is given for all employed characterization techniques,

Controlling source concentration during the chemical vapor deposition process plays an important role in obtaining full coverage of the substrate with single layer

- Check that the correct procedure has been loaded in the navigation system; and - Cross-check between the navigation system display and the approach chart.. The test shall

> Undersigned applicant is aware of the consequences of providing incomplete, inaccurate or false information related to the issue, revalidation or renewal of this licence or

Skill Test for BPL Commercial operation rating Hot-air Balloon, Gas Balloon and Hot-Air Airship Version Date:

(*) If no suitable training aircraft is available to demonstrate the fully developed spin including spin recovery, or if such spin. manoeuvres cannot be performed due to bad

approach to stall descending turn with bank angle 20 °, approach

Skill Test for a BPL (excluding Commercial operation rating) Hot-air Balloon, Gas Balloon and Hot-Air Airship.. Version Date: 08-04-2020