Cover Page The handle http://hdl.handle.net/1887/58773

The principle of OMIT is the following: a strong control beam is placed on the lower side-band at a laser detuning of ∆ = −Ω m , where Ω m is the frequency of the

pump laser is on, the effective temperature for each specific detuning is obtained by compairing the integrated area of each mechanical thermal noise spectrum to the integrated area

6.3 is obtained from a single simultaneous fit to all data with only four free parameters: the optical linewidth, the mode splitting and the input power of both the horizontal

Therefore, the interaction of the inner resonator with the cavity field causes a large optical spring effect for the mechanical motion of the outer resonator.. This can lead to

At low read-out laser powers, the noise floor is limited by shot noise. Increas- ing the laser power decreases the noise floor, but only down to the value shown in Fig. A

Title: Autophagy and Lc3-associated phagocytosis in host defense against Salmonella Issue Date: 2017-10-12...

Non- invasive imaging in zebrafish embryos expressing a fluorescently tagged version of the autophagy marker Lc3 (microtubule-associated protein light chain 3) made

The relevance of immunometabolism for human disease is emerg- ing strongly from recent studies that have revealed extensive metabolic reprogramming of human macrophages and