Hard Disk Drive Duplicator Dock – USB 3.0 to SATA HDD Duplicator
Product ID: SATDOCK22RU3
The SATDOCK22RU3 USB 3.0 to SATA Hard Drive Duplicator Dock can be used as a standalone SATA hard drive duplicator, or as a USB 3.0 SATA hard drive docking station, enabling you to duplicate/clone an existing hard drive without the use of a host computer system or access docked hard drives as though they were installed within the computer system.
In Duplicator Mode, it creates an exact 1-to-1 sector clone from one hard drive to another, including partition and boot sector information and all data, at a rate of ~72MB/second, ensuring data integrity and consistency for sensitive operations (data recovery, etc.).
In Dock Mode, it can be connected to your host computer through USB 3.0, supporting up to 5 Gbps of
bandwidth from both hard drives to your computer system. Large capacity drives (tested with up to 4TB
3.5" and 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup
capabilities.
The value of this hard drive docking station can be further extended through a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.
www.startech.com
1 800 265 1844
Certifications, Reports
and Compatibility Applications
• Disk sector imaging/cloning to create an exact replica of a source drive onto another hard drive
• Create identical backups for when data integrity is crucial, such as in data recovery and forensic applications
• Technicians who require access to bare hard drives for
backup/recovery purposes or needs to swap between drives regularly
• Quickly access data from a drive, without having to install it internally or into an enclosure
Features
• Standalone Sector by Sector copying including the HPA
• SuperSpeed USB 3.0 host interface, with support for data transfer rates up to 5 Gbps
• Supports 2.5in or 3.5in form factor hard drives (HDD) or solid state drives (SSD)
• LED progress bar for duplication status
• Compact, desktop-style form factor
• Hot-Swap and Plug-and-Play compatible
Warranty 2 Years
Hardware Aantal stations 2
Bus type USB 3.0
Chipsetcode JMicron - JMS551
Interface USB 3.0
Schijfgrootte 2.5in & 3.5in
Schijfinstallatie Verwijderbaar
Schijftype SATA
Ventilator(en) Nee
Prestaties Max. schijfcapaciteit Currently tested with up to 4TB 5400 RPM hard drives per bay (8TB total) and 1TB 5400 RPM 2.5" hard drives (2TB total)
Type en snelheid USB 3.0 - 5 Gbit/s SATA II (3 Gbps)
Connector(en) Hostaansluitingen 1 - USB Type-B (9-polig) USB 3.0 Vrouwelijk
Schijfaansluitingen 2 - SATA data & voeding combinatie (7+15-polig) Contact Software Besturingssystemen Windows XP(32/64-bit)/ Server 2003(32/64-bit)/ Server
2008 R2/ Vista(32/64-bit)/ 7(32/64-bit)/ 8 (32/64-bit) Mac OS 10.4/ 10.5/ 10.6/ 10.7/ 10.8
Linux Speciale opmerkingen
/ vereisten
Notitie
For duplication, the destination drive must be of equal or greater capacity than the source drive.
If the source drive contains an EISA (Extended Industry Standard Architecture) partition, the EISA partition needs to be removed prior to beginning the duplication.
Indicatoren LED-indicatoren 1 - Duplication Progress (Blue) 1 - Power (Green)
2 - Drive Power/Activity (Blue) Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 110V-240V AC
Ingangsstroom 1.2A
Polariteit pin midden Positief
Stekkertype N
Uitgangsspanning 12 DC
www.startech.com
1 800 265 1844
Uitgangsstroom 4A
Gebruiksomgeving Bedrijfstemperatuur 0°C to 85°C (32°F to 185°F) Opslagtemperatuur -10°C to 95°C (14°F to 203°F)
Vochtigheid 5% ~ 90% RH
Fysieke
eigenschappen
Breedte product 4.1 in [103 mm]
Gewicht product 19.8 oz [562 g]
Hoogte product 2.4 in [62 mm]
Kleur Zwart
Lengte product 5 in [128 mm]
Type behuizing Kunststof
Verpakkingsinformatie Verpakkingsaantal 1
Verzendgewicht (verpakt) 24.7 oz [700 g]
Wat wordt er meegeleverd
Meegeleverd 1 - Hard Drive Duplicator
1 - USB 3.0 Cable 1 - Power Adapter 1 - Instruction Manual Product appearance and specifications are subject to change without notice.