• No results found

Press the Save soft key to accept the change

In document Configuring Basic Features ... 49 (pagina 46-50)

SIP-T20P

4. Press the Save soft key to accept the change

The IP phone reboots automatically to make settings effective after a period of time.

If DHCP is disabled or IP phones cannot obtain network parameters from the DHCP server, you need to configure them manually. The following parameters should be configured for IP phones to establish network connectivity:

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

Procedure

Network parameters can be configured manually using the configuration files or locally.

Configuration File <y0000000000xx>.cfg

Configure network parameters of the IP phone manually.

Parameters:

network.internet_port.type network.ip_address_mode network.internet_port.ip network.internet_port.mask network.internet_port.gateway network.primary_dns

network.secondary_dns

Local

Web User Interface

Configure network parameters of the IP phone manually.

Navigate to:

http://<phoneIPAddress>/servlet

?p=network&q=load

Phone User Interface Configure network parameters of the IP phone manually.

Details of Configuration Parameters:

Parameters Permitted Values Default

network.internet_port.type 0, 1 or 2 0

Description:

Configures the Internet (WAN) port type for IPv4 when the IP address mode is configured as IPv4 or IPv4&IPv6.

0-DHCP 1-PPPoE

2-Static IP Address

Note: If you change this parameter, the IP phone will reboot to make the change take effect.

Web User Interface:

Network->Basic->IPv4 Config Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv4

network.ip_address_mode 0, 1 or 2 0

Description:

Configures the IP address mode.

0-IPv4 1-IPv6 2-IPv4&IPv6

Note: If you change this parameter, the IP phone will reboot to make the change take effect.

Web User Interface:

Network->Basic->Internet Port->Mode (IPv4/IPv6) Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN

Parameters Permitted Values Default Port->IP Mode

network.internet_port.ip IPv4 Address Blank

Description:

Configures the IPv4 address when the IP address mode is configured as IPv4 or IPv4&IPv6, and the Internet (WAN) port type for IPv4 is configured as Static IP Address.

Example:

network.internet_port.ip = 192.168.1.20

Note: If you change this parameter, the IP phone will reboot to make the change take effect.

Web User Interface:

Network->Basic->IPv4 Config->Static IP Address->IP Address Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv4->Static IP Client->IP Address

network.internet_port.mask Subnet Mask Blank

Description:

Configuresthe IPv4 subnet mask when the IP address mode is configured as IPv4 or IPv4&IPv6, and the Internet (WAN) port type for IPv4 is configured as Static IP Address.

Example:

network.internet_port.mask = 255.255.255.0

Note: If you change this parameter, the IP phone will reboot to make the change take effect.

Web User Interface:

Network->Basic->IPv4 Config->Static IP Address->Subnet Mask Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv4->Static IP Client->Subnet Mask

network.internet_port.gateway IPv4 Address Blank

Parameters Permitted Values Default

Description:

Configures the IPv4 default gateway when the IP address mode is configured as IPv4 or IPv4&IPv6, and the Internet (WAN) port type for IPv4 is configured as Static IP Address.

Example:

network.internet_port.gateway = 192.168.1.254

Note: If you change this parameter, the IP phone will reboot to make the change take effect.

Web User Interface:

Network->Basic->IPv4 Config->Static IP Address->Gateway Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv4->Static IP Client->Default Gateway

network.primary_dns IPv4 Address Blank

Description:

Configuresthe primary IPv4 DNS server when the IP address mode is configured as IPv4 or IPv4&IPv6, and the Internet (WAN) port type for IPv4 is configured as Static IP Address.

Example:

network.primary_dns = 202.101.103.55

Note: If you change this parameter, the IP phone will reboot to make the change take effect.

Web User Interface:

Network->Basic->IPv4 Config->Static IP Address->Primary DNS Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv4->Static IP Client->IPv4 Pri.DNS

network.secondary_dns IPv4 Address Blank

Parameters Permitted Values Default

Description:

Configures the secondary IPv4 DNS server when the IP address mode is configured as IPv4 or IPv4&IPv6, and the Internet (WAN) port type for IPv4 is configured as Static IP Address.

Example:

network.secondary_dns = 202.101.103.54

Note: If you change this parameter, the IP phone will reboot to make the change take effect.

Web User Interface:

Network->Basic->IPv4 Config->Static IP Address->Secondary DNS Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv4->Static IP Client->IPv4 Sec.DNS

To configure the IP address mode via web user interface:

1. Click on Network->Basic.

In document Configuring Basic Features ... 49 (pagina 46-50)