• No results found

Make the desired change

In document Configuring Basic Features ... 49 (pagina 64-71)

SIP-T20P

2. Make the desired change

Parameters Permitted Values Default

Description:

Configures the access URL of the firmware file.

Example:

firmware.url = http://192.168.1.20/2.73.0.40.rom

Note: If you change this parameter, the IP phone will reboot to make the change take effect.

Web User Interface:

Settings->Upgrade->Select and Upgrade Firmware Phone User Interface:

None

To configure the way for the IP phone to check for configuration files via web user interface:

When the “Power On” is set to On, the IP phone will check configuration files stored on the provisioning server during startup and then will download firmware from the server.

This chapter provides information for making configuration changes for the following basic features:

Power Indicator LED

Notification Popups

Contrast

Backlight

Call Display

Web Server Type

User Password

Administrator Password

Phone Lock

Time and Date

Language

Input Method Customization

Logo Customization

Softkey Layout

Key as Send

Dial Plan

Hotline

Off Hook Hot Line Dialing

Directory

Search Source in Dialing

Missed Call Log

Local Directory

Live Dialpad

Call Waiting

Auto Redial

Auto Answer

Call Completion

Anonymous Call

Anonymous Call Rejection

Do Not Disturb

Busy Tone Delay

Return Code When Refuse

Early Media

180 Ring Workaround

Use Outbound Proxy in Dialog

SIP Session Timer

Session Timer

Call Hold

Call Forward

Call Transfer

Network Conference

Feature Key Synchronization

Transfer on Conference Hang Up

Directed Call Pickup

Group Call Pickup

Dialog Info Call Pickup

ReCall

Call Park

Calling Line Identification Presentation

Connected Line Identification Presentation

DTMF

Suppress DTMF Display

Transfer via DTMF

Intercom

Power indicator LED indicates power status and phone status. There are six configuration options for power indicator LED:

Common Power Light On

Common Power Light On allows the power indicator LED to be turned on.

Ringing Power Light Flash

Ringing Power Light Flash allows the power indicator LED to flash when the IP phone receives an incoming call.

Voice/Text Mail Power Light Flash

Voice/Text Mail Power Light Flash allows the power indicator LED to flash when the IP phone receives a voice mail or a text message.

Mute Power Light Flash

Mute Power Light Flash allows the power indicator LED to flash when a call is mute.

Hold/Held Power Light Flash

Hold/Held Power Light Flash allows the power indicator LED to flash when a call is placed on hold or is held.

Talk/Dial Power Light On

Talk/Dial Power Light On allows the power indicator LED to be turned on when the IP phone is busy.

Note

Procedure

Power indicator LED can be configured using the configuration files or locally.

Configuration File <y0000000000xx>.cfg

Configure the power indicator LED.

Parameters:

phone_setting.common_power_le d_enable

phone_setting.ring_power_led_flas h_enable

phone_setting.mail_power_led_fla sh_enable

phone_setting.mute_power_led_fl ash_enable

phone_setting.hold_and_held_po wer_led_flash_enable

phone_setting.talk_and_dial_powe r_led_enable

Local Web User Interface

Configure the power indicator LED.

Navigate to:

http://<phoneIPAddress>/servlet?

p=features-powerled&q=load For SIP-T28P IP phones, the hardware version must be 1.0.0.2 or higher. For SIP-T26P IP Phones, the hardware version must be 4.0.0.2 or later.

Details of Configuration Parameters:

Parameters Permitted

Values Default

phone_setting.common_power_led_enable 0 or 1 1

Description:

Enables or disables the power indicator LED to be turned on.

0-Disabled (power indicator LED is off)

1-Enabled (power indicator LED is solid green)

Note: The old parameter “features.power_led_on” is also applicable to IP phones.

Web User Interface:

Features->Power LED->Common Power Light On Phone User Interface:

None

phone_setting.ring_power_led_flash_enable 0 or 1 1

Description:

Enables or disables the power indicator LED to flash when the IP phone receives an incoming call.

0-Disabled (power indicator LED does not flash)

1-Enabled (power indicator LED fast flashes (300ms) green) Web User Interface:

Features->Power LED->Ring Power Light Flash Phone User Interface:

None

phone_setting.mail_power_led_flash_enable 0 or 1 0

Description:

Enables or disables the power indicator LED to flash when the IP phone receives a voice mail or a text message.

0-Disabled (power indicator LED does not flash)

1-Enabled (power indicator LED slow flashes (1000ms) green) Web User Interface:

Features->Power LED->Voice/Text Mail Power Light Flash Phone User Interface:

None

Parameters Permitted

Values Default

phone_setting.mute_power_led_flash_enable 0 or 1 1

Description:

Enables or disables the power indicator LED to flash when a call is mute.

0-Disabled (power indicator LED does not flash)

1-Enabled (power indicator LED fast flashes (300ms) green) Web User Interface:

Features->Power LED->Mute Power Light Flash Phone User Interface:

None

phone_setting.hold_and_held_power_led_flash_enable 0 or 1 0

Description:

Enables or disables the power indicator LED to flash when a call is placed on hold or is held.

0-Disabled (power indicator LED does not flash)

1-Enabled ( power indicator LED fast flashes (500ms) green) Web User Interface:

Features->Power LED->Hold/Held Power Light Flash Phone User Interface:

None

phone_setting.talk_and_dial_power_led_enable 0 or 1 1

Description:

Enables or disables the power indicator LED to be turned on when the IP phone is busy.

0-Disabled (power indicator LED is off)

1-Enabled (power indicator LED is solid green) Web User Interface:

Features->Power LED->Talk/Dial Power Light On Phone User Interface:

None

To configure the power Indicator LED via web user interface:

In document Configuring Basic Features ... 49 (pagina 64-71)